1.
reaming and deburring tube tool
铰孔和去毛刺管状刀具
2.
Point-to-point systems are suitable for hole-machining operations such as drilling, countersinking, counterboring, reaming,Boring, and tapping.
点位系统适用于钻孔、锪孔、扩孔、铰孔、镗孔、攻丝等孔加工。
3.
vertical broading machine for working metal
用于金属加工垂直式铰孔机
4.
This machine can be used drilling,core drilling, reaming,boring,tapping, spot-facing and chamfering etc.
可以进行钻孔、扩孔、铰孔、镗孔、攻丝、锪平面，倒角等工作。
5.
Do not overexert when reaming holes or threading, lest breaking off the reamer or the screw tap.
铰孔或攻丝时，不要用力过猛，以免折断铰刀或丝锥。
6.
Processing techniques for 3000kW main cement mill reducer hollow gear shaft and its connections with hinges
水泥磨3000kW主减速机空心齿轮轴配铰孔加工技巧
7.
Recommended for heavy duty machining of soft aluminium and ferrous materials, such as tapping, ream and sawing.
推荐使用于软铝、黑色金属的重负荷加工，如，切螺纹、铰孔和锯削等。
8.
Before installing the valve, be sure that the pipe ends are reamed and threads are cut to size.
在安装阀门之前，要确保管道末端经过铰孔，螺纹长度切割适中。
9.
Before installing, be sure pipe ends are reamed and threads are cut to size.
在安装之前，要确保管道连接端已经经过铰孔，螺纹有足够的长度。
10.
The Analysis of "Reaming Hole Phenomenon" in Reaming And the Simplified Location of Reaming Diameter;
铰削中“孔现象”的分析及铰刀直径的简化确定
11.
Hexagon fit bolts--Product grade A and B
Gb/T27-1988六角头铰制孔用螺栓A和bb>级b>
12.
Hexagon fit bolts with Split pin hole on shank--Product grade A and B
Gb/T28-1988六角头螺杆带孔铰制孔用螺栓A和bb>级b>
13.
The Improved design of Reamer of Reaming Pin Holes in Iron-Based Powder Metallurgical Cone Synchronizer Ring
铁基粉末冶金同步器锥环销孔铰刀的改进设计
14.
Machining of High Accuracy Combined Bores in Hydraulic Elements by a Stepped Reamer
使用阶梯铰刀加工液压元件高精度复合孔
15.
With rear door closed and front door open, remove door hinge pin and bushing with a punch.
通过关闭后车门和打开前车门，用钻孔器拆卸车门铰链销和衬套。
16.
The Modification of Drill Machine Tool and Reaseach of Process Technics to Gun Drilling and Gun Reaming;
改造连杆螺栓孔枪钻组合机床和对枪钻铰工艺研究
17.
Programming Control of Combined Machine Tool for Drilling, Expanding and Boring Locating Hole of S1105 Cylinder Cover;
S1105气缸盖定位孔钻扩铰立式组合机床的系统设计与程序控制
18.
Fit hinge 5 into the opening in the machine bed, and fit the machine head to table rubber hinge 6 before placing the machine head on cushions 7 on the four corners.
把铰链5放到机台的孔上，对准台板橡胶支座6，把头部放到四角的机头胶垫7上。