1.
Recycle of Spent Acidic Etchant for Printed Circuit Board
印制电路板酸性蚀刻废液的回收利用
2.
Study on the electrode process kinetics of recycle of spent acidic etchant for printed circuit board
印刷电路板酸性蚀刻废液回收工艺中电极反应过程动力学研究
3.
A New Technology for Production Basic Copper Carbonate from Waste Etching;
利用含铜蚀刻废液合成碱式碳酸铜新工艺研究
4.
Technics for Producing Bluestone from the Waste Liquid Engendered from the Etching of Circuit Boards;
从刻蚀电路板废液中制取硫酸铜的工艺研究
5.
Study on Trace Zinc and Nickel Removal in Ferric Chloride Preparation Technology Using Waste Etchant and Waste Acid
利用蚀刻废液和废酸制取三氯化铁工艺中微量锌镍去除研究
6.
Recovery of Copper Extracted from the Spent Nitric Etching Solutions of Printed Circuit Board Using CP-150
利用CP-150萃取回收PCB碱性蚀刻废液中的铜
7.
Alkaline etching of the comprehensive utilization of waste water-Hydrazine hydrate to restore the recovery of copper
碱性蚀刻废液的综合利用----水合肼还原回收铜
8.
Experimental Research on the Characteristics of the CrMo Steel by Etch Solution;
蚀刻液对CrMo钢蚀刻特性的实验研究
9.
A corrosive substance, such as an acid, used in etching.
金属腐蚀剂一种用于蚀刻腐蚀性物质，例如酸
10.
Reuse treatment of spent copper-containing etching solution for printed circuit board-Part II
印刷线路板含铜废蚀刻液的回用处理(二)
11.
Reuse treatment of spent copper-containing etching solution for printed circuit board-Part Ⅰ
印刷线路板含铜废蚀刻液的回用处理(一)
12.
Effect of hydrofluoric acid etching time on Ni/6H-SiC contacts
氢氟酸刻蚀对Ni/6H-SiC接触性质的作用
13.
RESEARCH ON PICKING INHIBITER MADE BY HYDROLYSIS OF WASTER IN REREFINING PHYTIN
水解精制菲汀过程中的废液、渣制取酸洗缓蚀剂
14.
Inhibition Properties of Acidizing Corrosion Inhibitor for N80 Steel in Hydrochloric Acid
酸化缓蚀剂对N80钢在盐酸溶液中的缓蚀性能
15.
Novel Centrifugal Extraction-stripping Process-Treating Spent Etchant from Printed Circuit Board Industry Environmentally Friendly;
离心萃反联合新工艺—环境友好处理印制线路板蚀刻废液
16.
To cut into the surface of(glass, for example) by the action of acid.
蚀刻用酸蚀刻（玻璃的）表面
17.
The corrosive action of acid upon an etcher's metal plate.
腐蚀蚀刻器的金属盘上的酸腐蚀
18.
an aqueous solution of hydrogen chloride; a strongly corrosive acid.
氯化氢的水溶液，一种腐蚀性强酸。