说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 钼铜复合粉
1.
Production and Sintering Property of Ultra-fine W-Cu and Mo-Cu Powders;
超细钨铜和钼铜复合粉体的制备及其烧结性能研究
2.
Synthesis and Sinterability of Superfine W-Cu and Mo-Cu Powders by Wet-chemical Methods
湿化学法制备超细钨铜和钼铜复合粉体及其烧结性能的研究
3.
Sintering behavior of Mo/Cu composite powders prepared by electroless copper plating on molybdenum powders
钼粉表面化学镀铜复合粉末烧结致密化
4.
Study on Rapid Prototyping Preparation Process of Molybdenum/Copper Composites
钼/铜复合材料快速成型制备工艺研究
5.
Study on Effect Factors About Relative Density of Mo/Cu Composite
钼铜复合材料致密度的影响因素研究
6.
Nickel-coated copper composite powders
GB/T3993-1983镍包铜复合粉
7.
Research on Influence of Milling Techniques on Tungsten-copper Composite Powder and Its Alloy;
球磨工艺对钨铜复合粉及钨铜合金影响研究
8.
Study on Preparation of Copper Matrix Composites Enhanced by Molybdenum Silicide and Friction and Wear Properties;
硅化钼增强铜基复合材料的制备及摩擦磨损性能研究
9.
The Study of Preparation, Microstructure and Properties of Cu-MoS_2 Composites
铜—二硫化钼复合材料的制备及其组织与性能研究
10.
Sintering and Phase Transition of 0.25CuO-0.75MoO_3 Doped ZnO-TiO_2 Microwave Dielectric Ceramics
铜钼复合添加ZnO-TiO_2微波介质陶瓷的低温烧结及相转变
11.
Study on Removing the Powder Rust of Bronze by AHH-1 Complex Reagent as an Bronze Inhibitor;
AHH-1复合剂去除青铜粉状锈及缓蚀性能研究
12.
Effect of Preparation Technology on Thermal Stability of Cu Coated MoSi_2 Composite Particles
制备工艺对铜包裹MoSi_2复合粉体热稳定性的影响
13.
Research on Bulk Flotation of a Copper-Molybdenum Ore
黑龙江某铜钼矿石混合浮选试验研究
14.
Ore Dressing Tests of Complex Copper-Molybdenum Ore in Tuanjishan Deposit
团箕山复杂铜钼多金属矿选矿试验研究
15.
MINERAL PROCESS TECHNOLOGY RESEARCH ON COMPLEX AND DIFFICULT MORE METALS ORE OF Mo,Cu,S
复杂难选钼铜硫多金属矿选矿技术研究
16.
Experimental Staely on the Comprehensive Recovery of Mo Difficultly Handle from the Copper Concentrate;
金堆城钼业集团公司铜精矿中难选钼的综合回收试验研究
17.
Manufacture and Properties of Nanodiamond/Cu Composites by Powder Metallurgy;
粉末冶金法制备纳米金刚石/铜基复合材料及其性能研究
18.
Study on Parameters Optimization and Mechanical Properties of Selective Laser Sintering with Nylon6 Mixed Copper Composite Powders
尼龙6/铜复合粉末选区激光烧结工艺参数优化及力学性能研究