1.
Control of Distortion for Large and Thin Quenching and Tempering Steel Plate after Cold Pressing Quenching
大型薄形调质钢板热处理冷压淬火畸变控制
2.
Analysis of abnormal distortion of driven bevel gear after carburizing and hardening
从动锥齿轮渗碳淬火后异常畸变分析
3.
Study on the Effect of Material and Technology Factors on the Distortion of Carburizing and Hardening Gears;
材料和工艺因素对渗碳淬火齿轮畸变影响的研究
4.
Hardening means making harder .
淬火就是促使变硬。
5.
Anneal means make harden steel soft and remove brittleness.
退火就是使淬火钢变软并消除其脆性。
6.
The Austenite Inverse Phase Transformation Quenching in Zero Time Holding of 40Cr Steel
40Cr钢“零保温”奥氏体逆相变淬火
7.
EXAMINATION AND ANALYS OF THE GRINDING AFFECTED LAYER OF CARBURIZED AND HARDENED GEARS
渗碳淬火齿轮磨削变质层的检测与分析
8.
Study of the Phase Transition in Quenched Disorder System on Small World Networks
小世界网络上淬火无序系统相变的研究
9.
Analysis and Measure of Prick Gear Carburizing Quenching Distortion of Automobile Rear Bridge
汽车后桥被动锥齿轮渗碳淬火变形分析与对策
10.
Simulation of deformed area for pre-stretching aluminum alloy thick plates
淬火铝合金厚板预拉伸变形区域仿真与分析
11.
Influence of quenching temperature on austenite-ferrite phase transformation behavior of Fe-3Mn alloy
淬火温度对Fe-3Mn合金γ→α转变过程的影响
12.
Residual Stress of Carbonized and Quenching Gear Considering Phase Transformation Plasticity
考虑相变塑性影响的渗碳淬火齿轮的残余应力
13.
Study on Austempering Process Parameters of Modified Low Chromium White Cast Iron
低铬变质白口铸铁等温淬火工艺参数的研究
14.
The inner stress produced by quick cooling during quenching is the basic reason of formation of quench-distortion of parts.
淬火过程中的快速冷却在工件内部产生的内应力是导致淬火变形的根本原因。
15.
continuous quench and temper line
淬火回火连续作业线
16.
Doppelduro method
乙炔火焰表面淬火法
17.
Why shall harden steel be annealed ?
淬火钢为什么要退火呢?
18.
The Carburization Quenching Distortion Rule and Mechanism Study of a New Kind of Micro-distortion and High Strength High Toughness Bainitic Steel;
新型微变形高强韧贝氏体GDL-1钢渗碳淬火变形规律的探索