1.
In-situ reaction hot-pressing sintering process of SiC/MoSi_2 composites
SiC/MoSi_2复合材料的原位反应热压烧结工艺
2.
Microstructure and Mechanical Properties of Reactive Hot-Pressed BN-ZrB_2-ZrO_2 Composites
反应热压烧结BN-ZrB_2-ZrO_2复合材料的显微组织与力学性能
3.
Research on Mechanical Properties of SiC/MoSi_2 Composites Prepared by Technology of In-situ Reaction Hot-pressing Sintering
原位反应热压烧结SiC/MoSi_2复合材料的力学性能研究
4.
Influence of sintering additive on the performance of B_4C based composites sintered by reaction hot-pressing
烧结助剂对反应热压烧结B_4C基复合材料性能的影响
5.
Study on Wear-resistant Property of TiCNi/Fe Ceramic Coating Produced by SHS Reactive Hot Pressing
TiCNi/Fe自蔓延反应热压复合工艺及其摩擦磨损性能研究
6.
Sealing Analysis under Cooling and Heating Cycle for Reactor Pressure Vessel in Nuclear Power Station;
核电站反应堆压力容器冷热态密封分析
7.
Quality Control of Hot-working Process for Large-sized Forging Reactor Pressure Vessel
反应堆压力容器大型锻件热加工质量控制研究
8.
Thermodynamics Analysis of the Relationship between Pressure and Filling Factor of Alkali Hydroxide in Hydrothermal Vessel;
强碱液在水热反应釜中压强与填充度关系的热力学分析
9.
An exothermic reaction releases heat(energy).
放热反应释放出热量（能）。
10.
The reactor afterheat under conditions of depressuriza-tion and loss of main heat sink would be removed away through mechanism ofpassive heat transfer by conduction, radiation and natural convection.
失冷和失压工况下,由导热、辐射和自然对流等被动传热机制能将剩余发热安全地传出反应堆。
11.
Research on Technical Process and Properties for Reaction Formation and Post-Hot-Pressing Preparation of Si3N4/MoSi2 Composite;
反应形成—热压烧结制备Si3N4/MoSi2陶瓷材料的工艺过程及性能研究
12.
The Pilot Study on Synthesizing Metal/Metal Silicide Multiphase Alloys by Hot-pressing In-situ Reaction Sintering;
热压原位反应合成金属/金属硅化物复相合金的初步研究
13.
Study on Human Thermal Comfort within Lower-pressure Environment of Asymptomatic Altitude Reaction;
无症状高原反应域低气压环境下人体热舒适研究
14.
Thermoelectric properties of β-FeSi_2 based thermoelectric materials by FAPAS
电场激活压力辅助反应合成法制备β-FeSi_2及其热电性能分析
15.
Investigation on Elements Inter-diffusion in Reaction Layer During Hip Between Corrosion-resistant Alloy and Carbon Steel
耐蚀合金/碳钢热等静压扩散焊接反应层元素互扩散规律研究
16.
In-Situ Reaction Synthesis of Sub-Micro-Layered Ti_3C_2/(Cu-Al) Cermet with High Performance
原位热压反应制备高性能亚微米层状Ti_3C_2/(Cu-Al)金属陶瓷
17.
Synthesis of Al_2O_3/Ti_2AlC Composite by in-situ Hot-pressing Method
热压反应烧结法制备Al_2O_3/Ti_2AlC复合材料及其微观结构和性能
18.
CNTs reinfoced alumina ceramics prepared by hot pressing technology with ultra-fast heating rate based on combustion reaction
燃烧反应超快升温热压制备碳纳米管/氧化铝复合材料