1.
Study on Active Screen Plasma Nitriding of Austenitic Stainless Steel;
奥氏体不锈钢活性屏离子渗氮的研究
2.
Study of Mechanism and Application of Active Screen Plasma Nitriding;
活性屏离子渗氮的机理及应用基础研究
3.
Test of Wear Resistance on Piston Rings Treated by Rare-earth Ion Carburizing after Quenching and Tempering
活塞环调质稀土离子渗氮处理耐磨性能试验
4.
RE-nitrocarburizing Technology for Piston Rod Made of 40CrMnMo
40CrMnMo活塞连杆稀土离子氮碳共渗工艺
5.
Research on New Process of Ion Nitriding at Pure Nitrogen Atmosphere and Ion Nitriding Mechanism;
纯氮离子渗氮新工艺及离子渗氮机理研究
6.
Effect of Cycle Plasma Nitriding Process on Structure and Properties of Nitrided Layer of Steel 38CrMoAl
循环等离子渗氮工艺对38CrMoAl钢渗氮层组织和性能的影响
7.
Effect of Nitriding Temperature on Microstructure and Properties of Plasma Nitriding Layer of 3Cr13 Stainless Steel
渗氮温度对3Cr13不锈钢表面离子渗氮层组织和性能的影响
8.
Process and Mechanism of Ion-nitriding under the Atmosphere of N_2 and N_2-NH_3;
纯氮、氮—氨离子渗氮工艺和机理研究
9.
Anticorrosion Properties of Pure Titanium by Means of Plasma Nitriding Technique
等离子渗氮对纯钛耐腐蚀性能影响的研究
10.
Microstructure and properties of plasma nitrided 00Cr12Ni9Mo4Cu2Ti maraging stainless steel
00Cr12Ni9Mo4Cu2Ti马氏体时效不锈钢离子渗氮组织和性能
11.
Surface modification of plasma nitriding process on titanium bipolar plate
钛基双极板等离子体渗氮表面改性工艺的研究
12.
Effect of Ion Nitriding-Sulfurizing Composite Treatment on Tribological Behavior of Ti-6Al-4V
离子渗氮—渗硫复合处理对Ti-6Al-4V合金摩擦学性能的影响
13.
Study on nitrogen-rich layer fast plasma nitriding process and mechanism
富氮层快速离子渗氮工艺及机理研究
14.
Study on fast plasma nitriding technology of 40Cr steel with nitrogen-rich layer
40Cr钢富氮层快速离子渗氮技术的探索
15.
Research of the Cylinder Sleeve and Piston Ring of Marine Diesel be Third Element Together Permeate Deal with Sulfur-charcoal Glow Ionic Nitriding;
船用柴油机气缸套及活塞环采用辉光离子硫碳氮三元共渗的研究
16.
Surface Texturing and Plasma Nitriding Treatment of Titanium Alloy and Study of Its Bio-tribological Properties;
钛合金表面织构与等离子渗氮处理及其生物摩擦特性研究
17.
Study on the Microstructure and Properties of Surface Layer of Low Temperature Plasma Re Nitrocarburized 17-4PH Steel
17-4PH钢低温等离子体稀土氮碳共渗层组织与性能研究
18.
Duplexed Surface Modification of Ti6Al4V Alloy by Microarc Oxidation Combined with Plasma Nitriding
Ti6Al4V合金表面微弧氧化及脉冲等离子体渗氮复合改性研究