1.
Large-size bolts assembling and disassembling in hydroturbine maintenance of Gezhouba Hydropower Plant
葛洲坝电厂水轮机检修中的大型螺栓拆装
2.
Burying and Anti-pulling Test Research on Large Anchor Bolt
大型地脚螺栓的埋设和抗拔试验研究
3.
Strength analysis for special bolt of large-scale hanger system
大型挂载起吊系统特种螺栓强度分析
4.
Force analysis and design of connecting bolts in large mining mill
大型矿用磨机联接螺栓的受力分析与设计
5.
Bolts for T-Slot
GB/T37-1988T型槽用螺栓
6.
Bolt, X-member/rear support
螺栓，X型构件/后支架
7.
Remove nuts, U-bolts and spring bracket from axle.
由车轴拆下螺帽，U型螺栓和弹簧支架。
8.
Calculation of the maximum working load of tower bolts for large-scale wind turbine
大型风力发电机组塔架联接螺栓最大工作载荷的计算
9.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
10.
Throttle Body Mounting Bolts—Engines—Typical
节气阀体固定螺栓—引擎—典型的
11.
Finite Element Analysis of Mechanical Strength of Automobile Bolts
某型汽车螺栓力学强度的有限元分析
12.
Bolt connection of traction device on type HX_D1 locomotive
HX_D1型机车牵引装置上的螺栓连接
13.
Cup head square neck bolts with large head--Product grade C
GB/T14-1998大半圆头方颈螺栓C级
14.
Cup head nib bolts with large head
GB/T15-1988大半圆头带榫螺栓
15.
High strength bolts with large hexagon head for steel structures
GB/T1228-1991钢结构用高强度大六角头螺栓
16.
Mounting and Control on Full Diameter Bolt in 1780 Project in AISC
鞍钢1780工程大直径螺栓固定与控制
17.
double-screw bolt
螺柱，双头螺纹螺栓
18.
Medium and high voltage, large capacitance, screw, high ripple current.
中高压，大容量，螺栓结构产品，能承受大纹波电流。