1.
WELDING TECHNOLOGY,WELDING MANAGEMENT AND THE QUALITY CONTROL OF THE STEEL BOX GIRDER OF HUANGPU BRIDGE OF PEARL RIVER IN GUANGZHOU
广州珠江黄埔大桥钢箱梁环缝焊接工艺、焊接管理及焊接质量控制
2.
Reserch on the Welding Techniques and Joint Performance of the X80 Pipeline Steel;
X80管线钢环缝焊接工艺及接头性能研究
3.
In-situ detection of weld metal thermal cycle of 10CrMo910 steel
10CrMo910钢焊缝焊接热循环的实时检测
4.
Research of root welding technology and welding procedure with back-up shoes pipeline girth welding
带衬垫的管道环焊缝根焊技术及焊接工艺
5.
Experimental study circumferential weld residual stress of submarine pressure hull
潜艇耐压壳环焊缝焊接残余应力模拟实验研究
6.
Girth Welding of Large Reel Structure Pieces of Shell and Tube Plate
大型卷筒结构筒壳与幅板环焊缝的焊接
7.
Application of PIW48 pipe inner girth welding line
国产PIW48管道内环缝自动焊机焊接技术应用
8.
Experimental Study of Laser Girth Welding for Line Pipe Steel X100
X100管道钢环缝激光焊接的试验研究
9.
Analysis and countermeasures of overproof of the edge deviation of welding line in circular seam welding of boiler drum
锅筒环缝对接焊缝边缘偏差超标分析及对策
10.
Investigation on Computer Vision Inspection of Laser Welding of Inlet Tube Based on Digital Image Processing Technology;
基于数字图像处理技术的接杆激光环焊焊缝视觉检测系统研究
11.
High Pressure Water Environment Rotating Arc Sensor Welding Characteristic and Its Weld Seam Sensing and Tracking
高压水环境旋转电弧焊接特性及其焊缝传感跟踪研究
12.
Ceramic Cushion of Steel Pipe Weld Aided Device and Its Welding Procedure
钢管焊缝陶瓷垫补焊装置及焊接工艺
13.
YS Automatic Girth Welder (YS-AGW-I/II) is mainly used in horizontal girth inside / outside welding of large tanks、vessel etc. The welder applies submerged arc welding.
型埋弧自动横焊机采用埋弧横向焊接工艺，主要用于大型储罐、容器等内外环缝的焊接.
14.
Research on pipeline girth welding joint with copper infiltration and copper back-up shoes root welding
管道环焊缝采用铜衬垫根焊及焊缝渗铜研究
15.
Methods of radiographic inspection and quality classification of circumferential fusion welded butt joints in steel pipes and tubes
GB/T12605-1990钢管环缝熔化焊对接接头射线透照工艺和质量分级
16.
Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。
17.
Methods of ultrasonic inspection and result classification of circumferential butt welds in steel pipes and tubes
GB/T15830-1995钢制管道对接环焊缝超声波探伤方法和检验结果的分级
18.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制