1.
Comparative evaluation of finite element models for mechanical structures with bolted joints
机械螺栓法兰连接的有限元力学模型比较研究
2.
glass-reinforced thermosetting plastics (grp) pipes and fittings-test method to prove the design of bolted flange joints
玻璃增强热固塑料(GRP)管和配件-螺栓法兰连接的设计查验试验方法
3.
double-studded flange
双头螺栓连接的法兰
4.
studded-flange connection
带柱螺栓的法兰连接
5.
Research on Bolt Calculation in Forging Flanges Used in Steel Tube Tower
钢管塔锻造法兰连接螺栓的受力计算
6.
"When bolting to steel flanges, longer bolts or stud may be required."
当用螺栓与钢法兰连接时,可能需要更长的螺栓或螺杆。
7.
Structural Optimization of A Bolt-Flange Structure Based on Response Surface Design Method
基于多目标优化的螺栓-法兰连接结构尺寸设计
8.
Breaking Reason and Solution of the Connecting Bolts Used in the Ball Mill End Cover
球磨机端盖法兰连接螺栓的断裂原因及其解决
9.
Analysis of High-strength Bolt Group Splicing with Vertical Flange in Big Diameter Tower-silo
大直径塔筒纵向法兰连接中高强螺栓群受力情况研究
10.
Lug-style is a wafer body but has tapped lugs matching up to bolt circle of Class 125/150 flanges.
凸耳式:平板式阀体,但是具有螺纹凸耳,用于通过螺栓与125/150磅级法兰连接。
11.
boiler band joining eye bolt
锅炉带圈连接眼螺栓
12.
Treatment method of the high strength bolt friction type connection interface
高强度螺栓摩擦型连接接触面的处理方法
13.
The valve can be installed in horizontal or vertical. Add seal cushion between two flanges connection and screw down bolt.
本阀可水平或垂直安装，安装时两法兰连接中间必须加密封垫片，然后均匀锁紧螺栓。
14.
Pay attention to the flow direction of medium marked on the body. Add the sealed shim between the two flanges and then screw down the bolt.
安装时请注意闸门本体上标明介质流向。两法兰连接时必需加密封垫片，然后均匀锁紧螺栓。
15.
1 When flanges are integral with fittings or valves, holes for bolts are drilled to straddle the center line.
1如果法兰与连接件或阀门构成一个整体，则螺栓孔钻在圆心线两侧。
16.
3-D and Nonlinear Finite Element Analysis for Tubesheet-Gasket-Flange-Bolt System Considering Hysteresis Effect of Gasket Material;
考虑垫片时滞效应的管板-法兰-垫片-螺栓连接系统的非线性三维有限元分析
17.
Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange
焊接焊料适配器含盖管和铸造固定螺栓墙法兰
18.
Reliability of Analysis of the Primary Cylinder s Bolt Joint in Flange of the Hydraulic Press;
液压机主工作缸法兰处螺栓联接的可靠性分析