1.
Half Sine Wave Shock-exited Analysis Based on ASQ700 Model;
ASQ700跌落冲击试验机的半正弦波跌落冲击试验模型分析
2.
Board Level Lead-Free Solder Joints Reliability Analysis under Drop Shock Loading;
板级无铅焊点跌落冲击载荷下可靠性分析
3.
Study on Dropping Impact Dynamic Characteristic of Two-Degree-of-Freedom Packaging System
二自由度包装系统跌落冲击动力学特性研究
4.
Investigation of Mechanical Behaviors of Solder Joints under Drop Impact Loading
跌落冲击载荷作用下焊锡接点的力学行为研究
5.
Finite Element Simulation for the Drop Impact of Fluid-filled Container
贮液容器跌落冲击的有限元数值模拟研究
6.
Research on the Cushion Mechanism and Property of Airbag in a Dropping Manner;
空气垫在受到跌落冲击时的缓冲机理及性能研究
7.
The model was composed of one non-linear spring and one non-linear viscous damper.
依据跌落冲击未损伤时的试验结果，进行模型参数识别。
8.
Research on the Dropping Shock Response of Key Parts in Transport Packaging and the Indentification of the Parameters;
运输包装件关键部件跌落冲击响应及参数识别的研究
9.
Influence of Strain Rate Effect on Behavior of Solder Joints under Drop Impact Loading
应变率效应对无铅焊锡接点跌落冲击力学行为的影响
10.
From the point of view of viscoelasticity, dynamic responses of PCB under drop impact were calculated based on plate theory.
从黏弹性角度，基于板模型计算电路板在跌落冲击作用下的动力学响应。
11.
The secondary impact acceleration pulse which is produced by the drop-test can influence the testing parameters and cause fatigue and damage of components.
凸轮式跌落冲击台产生的次冲击能够影响试件的测试参数和性能,并能造成试件的疲劳损伤与失效。
12.
·Do not drop or otherwise subject the cassette to shock impact.
避免带子跌落，也不要使其受到冲击。
13.
Study of Mechanical Shock Data Acquisition System Used in Package Drop Test
冲击数据采集分析系统在包装跌落试验中的应用研究
14.
Numerical Simulation of Impact Acceleration on the Key Parts of Packing Ammunition on Condition of Dropping
跌落条件下箱装弹药关键部件冲击加速度的数值模拟
15.
Plunging movement, esp a steep fall
（向前或向下的）冲，投，落；（尤指）骤降，猛跌
16.
lash type inertia vibrating shakeout
冲击式惯性振动落砂机
17.
Fall out of
从。。。。跌落出来
18.
Research of spectrum dip at marine equipment anti-shock with elastic foundation
舰船弹性安装设备抗冲击设计的“谱跌”问题研究