1.
High Temperature Deformation Behavior of GH4169 Alloy;
GH4169合金高温压缩变形行为研究
2.
Hot Compression Deformation Behavior of TC11 Titanium Alloy;
TC11钛合金高温压缩变形行为研究
3.
High temperature compression deformation behaviors of AZ91D alloy
AZ91D镁合金高温压缩变形行为
4.
High Temperature Compressive Rheological Behavior of Glass/Aluminum Matrix Composites
玻璃铝基复合材料高温压缩流变行为研究
5.
Hot Compressive Deformation Behavior of Glass/Aluminum Metal Matrix Composites
玻璃铝基复合材料高温压缩变形行为研究
6.
Flow stress behaviors of in-situ TiB_2/6351 composite during hot compression deformation at elevated temperatures
原位合成TiB_2/6351复合材料的高温压缩流变行为
7.
A Study on Compressive Deformation Behaviors of in Situ Al_2O_3-TiCp/Al Composites at Elevated Temperatures;
原位自生Al_2O_3-TiC铝基复合材料高温压缩变形行为研究
8.
High Temperature Compression and Oxidation Properties of Ni_3Al and Its Composites Fabricated by Spark Plasma Sintering;
放电等离子烧结Ni_3Al及其复合材料的高温压缩与抗氧化性能
9.
STUDY ON COMPRESSION DEFORMATION OF WARM AND ICE-ENRICHED FROZEN SOIL
高温-高含冰量冻土压缩变形特性研究
10.
Flow Stress Behavior of 7056 Aluminum Alloy During Hot Compression Deformation at Elevated Temperature
7056铝合金高温热压缩流变应力行为
11.
Hot Compression and Microstructural Evolution of Ti43Al5Nb0.03Y Alloy
Ti43Al5Nb0.03Y合金高温热压缩行为及其组织演变
12.
Investigation on Static Recrystallization of 403Nb Leaf Steel During Hot Compression
403Nb叶片钢高温热压缩静态再结晶研究
13.
Experimental investigation into dynamic compressive mechanical properties of LY12 at high strain rates and high temperatures
高温、高应变率LY12铝压缩动态力学性能实验
14.
" Rubber, Vulcanized or thermoplastic Determination of compression set at ambient elevated or low temperatures"
GB/T7759-1996硫化橡胶、热塑性橡胶常温、高温和低温下压缩永久变形测定
15.
Study on the Behaviors of Magnesium Alloy during Uniaxial Compression and Multi-directional Deformation at Elevated Temperature;
镁合金高温单向压缩及多向变形行为研究
16.
Influence of the Compressor Frequency on the Cycle Parameters in Medium-high Temperature Heat Pump
高温热泵压缩机频率对循环参数的影响
17.
" Rubber, vulcanized--Determination of stress relaxation in compression at normal and at elevated temperature"
GB/T1685-1982硫化橡胶在常温和高温下压缩应力松弛的测定
18.
Avoid conditions that can result in high temperatures, such as adiabatic compression, from the rapid pressurization of a system.
避免可能导致来自系统迅速加压的高温的条件，如绝热压缩。