1.
The Experiments of Cationic Polymer Profile Control and Oil Displacement after Polymer Flooding;
聚合物驱后阳离子聚合物调剖驱油实验研究
2.
Construction of Flooding Bacteria for Reservior Post Polymer Flooding
聚合物驱后油藏高效驱油菌种的构建
3.
Determining Rational Well Pattern and Well Space for Combination Displacement after Polymer Flooding
聚合物驱后组合驱合理井网井距的确定
4.
Variation mechanism of petrophysical property of sandstone reservoir after polymer flooding
聚合物驱后砂岩储层岩石物理特征变化机制
5.
Study on laboratory experiment of combined thermal carrier foam flooding after polymer flooding
聚合物驱后复合热载体泡沫驱提高采收率实验研究
6.
Study on further EOR after polymer flooding
聚合物驱后进一步提高采收率途径的研究
7.
Replacing Technologies to Further Enhance Oil Recovery after Polymer Flooding
聚合物驱后进一步提高采收率接替技术
8.
Improving Profiling/Flooding Efficiancy of Injected Polymer by the Way of In-Situ Flocculation
聚驱后利用地层聚合物絮凝调驱研究与应用
9.
The Experimental Research on Surfactant-Polymer System Enhances Oil Recovery after Polymer Flooding
聚驱后聚合物表面活性剂驱提高采收率实验研究
10.
polymer augmented waterflood
聚合物加强注水驱油
11.
Research on the Rational Time of Finishing Polymer Flooding in Sazhong Area of Daqing Oil Field;
大庆萨中聚合物驱合理停聚时机研究
12.
The Laboratory Experiment of Surfactant-polymer System in Enhancing Producible Oil Index;
聚合物/表活剂二元复合驱室内驱油实验研究
13.
Mechanism of Polymer Flooding and a New Enhanced Oil Recovery of High-concentration Polymer Flooding;
聚合物驱油机理及高质量浓度聚合物驱油方法的研究
14.
Study on the Polymer Selection and Its Properties Evaluation in ASP Flooding
三元复合驱用聚合物筛选及性能评价
15.
Experimental Research on Sweep Coefficient and Oil Displacement Efficiency of Polymer Flooding;
聚合物驱波及系数和驱油效率的实验研究
16.
The Research on Relative Permeability Curves of Polymer Flooding and Alkali-surfactant-polymer Flooding System after Water Flooding
水驱后聚驱与三元复合驱体系相渗曲线规律研究
17.
Study on AOPs Oxidation Treatment of Produced Water from Polymer Flooding;
AOPs氧化处理聚合物驱采油污水的研究
18.
The Study on Optimizing Design of the Whole Parameter for Polymer Flooding;
聚合物驱抽油机井参数优化设计研究