1.
Preparation and properties of UHMWPE/PA1010 alloys
UHMWPE/PA1010塑料合金的制备及性能
2.
Study on High-performance Engineering Plastics Alloy Prepared by Recycled PET Bottles;
废饮料瓶制备高性能工程塑料合金的研究
3.
Study on Lubricant Mechanism and Design of Water Lubricated Plastic Alloy Bearings;
水润滑塑料合金轴承润滑机理及设计研究
4.
A Study on the Properties of Plastic Alloys and the Effects on Woodfiber and Plastic Alloy Composites;
塑料合金特性及其对木纤维复合材料性能影响的研究
5.
Suitable for a wide range of low and high alloy steels, titanium alloys, austenitic stainless steels, heat resistant alloys, fibre glass reinforced plastics etc.
适合于低合金钢、合金钢、合金、氏体不锈钢、热合金、璃纤维强化塑料等。
6.
We make good use of special plastics in place of alloy.
我们充分利用特种塑料来代替合金。
7.
Superplasticity Research on Semi-solid Blank of 7A09 Aluminium Alloy
7A09铝合金半固态坯料超塑性研究
8.
Test Research on Vibration and Anti-wear Behaviors of Metal-plastic Compound Materials
金属塑料复合材料减振耐磨性能的试验研究
9.
The specimens made from Bayer tooth, thermosetting plastic, copper base alloy, titanium and its alloy have relatively good wear resistance as well and are thus idea prosthetic materials.
拜尔牙、热固塑料、铜基合金、钛及钛合金是较为理想的牙科修复材料 ;
10.
Computer Aided Alloy Design of High Performance Prehardened Mold Steel for Plastic;
高性能预硬型塑料模具钢的计算机合金设计
11.
Research on Lightweight Magnesium Alloy with Super Plasticity and Its Development;
轻质超塑性镁合金材料研究现状与发展
12.
PREPARATION OF FUEL OIL FROM CATALYTIC CRACKING OF PLASTICS CATALYZED BY MIXED METALS;
以金属混合物催化裂解塑料制取油品的研究
13.
Simulation of the Deep Drawing of Aluminum Sheet Using Crystal Plasticity FEM
铝合金板料深冲成形的晶体塑性有限元模拟
14.
Study on Multiple Brush Plating of Ni-P Alloy on the Surface of PA Engineering Plastic
聚酰胺(PA)工程塑料表面刷镀镍磷合金工艺研究
15.
carbon fibre plastic composite
碳纤维塑料复合材料
16.
It is convenient to divide materials into three main types: metals, plastics or polymers and ceramics.
为方便起见,材料分为三大类:金属,塑料或聚合物和陶瓷。
17.
Preparation and Tribological Property of Self-lubrication Metallic Plastic Composite
金属塑料复合自润滑材料的制备及其摩擦学性能研究
18.
a waterproof plastic skin on a metal sheet
金属板的防水塑料外层.