1.
Charpy V-notch toughness
夏比v型缺口冲击韧性
2.
Crack Initiation Toughness and Crack Propagation Toughness of PA6/POE-g-MAH Blends in Notched Impact Tests
PA6/POE-g-MAH共混物缺口冲击的裂纹萌生韧性及裂纹扩展韧性
3.
notch ductile steel
耐冲击钢, 韧性钢
4.
Brittle-Ductile Transition of PA6/POE-g-MAH Blends in Notched Tensile and Notched Impact Tests
PA6/POE-g-MAH共混物在缺口冲击与缺口拉伸实验中的脆韧转变
5.
The fracture of K1 c and impact specimens were observed by SEM.
通过扫描电镜观察了断裂韧性和冲击试样断口。
6.
Influence of Carbon Content on the Microstructure Hardness and Impact Toughness in High Chromium White Cast Iron
含碳量对高铬白口铸铁组织、硬度及冲击韧性的影响
7.
The Influence of Heat Treatment Technology on the Impact Toughness and Hardness of White Cast Iron With Low Cr and Cu.
热处理工艺对低铬铜白口铸铁冲击韧性和硬度的影响
8.
Analysis of the Impact Toughness Test and Fracture of Rail Thermit Welding Joints at Low Temperature
低温下铁路钢轨铝热焊缝接头冲击韧性试验与断口分析
9.
The fracture appearance is dimple at room temperature,it changes into intercrystalline fracture at low-temperature.
其冲击断口微观形貌由室温时的韧窝断口逐渐变为低温下的塑性沿晶断口.
10.
Method of testing in toughness of wood
GB/T1940-1991木材冲击韧性试验方法
11.
Test method for impact toughness of high performance ceramics
GB/T14389-1993工程陶瓷冲击韧性试验方法
12.
Test method for impact toughness of ceramic floor tiles
GB/T2584-1981陶瓷地砖冲击韧性试验方法
13.
Influence of Metallurgy Quality on Impact Toughness of Low Temperature Cast Steel;
冶金质量对低温铸钢冲击韧性的影响
14.
Research on Improving the Low Temperature Impact Toughness of 09CuPCrNi-A H-beam;
提高09CuPCrNi-A耐候H型钢低温冲击韧性研究
15.
Investigation on the correlation between fracture toughness and impact energy for middle strength steel;
中强钢断裂韧性和冲击功关系的研究
16.
Study on Improving the Low-temperature Impact Toughness of 3.5% Nickel Heavy Plate
提高3.5Ni厚钢板低温冲击韧性的研究
17.
Reason Analysis on Low The Impact Toughness of L450 Pipeline Steel
管线钢L450冲击韧性低原因分析
18.
Analysis of Factors Influencing H13 Mandrel Steel's Impact Toughness
影响H13芯棒钢冲击韧性的因素分析