说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 高强度螺栓
1.
High strength bolts for joints of space grid structures
GB/T16939-1997钢网架螺栓球节点用高强度螺栓
2.
The Failure Characterizations Research on the High Strength Bolts Hydrogen Embrittlement
高强度螺栓氢脆断裂失效的表征研究
3.
Cracking Reason of the Head of ML20MnTiB High-strength Bolt
ML20MnTiB高强度螺栓头部开裂原因分析
4.
Construction Supervision over Erection of High-Strength Friction Grip Bolts in Lightgauge Steel Structure
轻钢结构高强度螺栓安装的施工监理
5.
Development of Steel Bar 42CrMo(B7)for High Strength Bolt
高强度螺栓用钢42CrMo(B7)的研制
6.
High-strength bolts were inserted into the holes and tightened to a high preload level.
高强度螺栓插入孔洞,同时拧紧螺栓达到高的预加载水平。
7.
Finite Element Analysis for Mechanical Property of High-strength Bolt Connection in High Temperature;
高强度螺栓连接高温力学性能有限元分析
8.
Code for design,construction and acceptance of high strength bolt connection of steel structures
钢结构高强度螺栓连接设计施工及验收规范
9.
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T3632-1995钢结构用扭剪型高强度螺栓连接副
10.
The Finite Element Method and Experimental Analysis of High Strength Bolted Connections;
高强度螺栓抗拉连接的仿真及实验研究
11.
Development of Class 14.9 Bolt for Automotive Industry and Study on Its Properties;
汽车用14.9级高强度螺栓的开发及性能研究
12.
EXPERIMENTAL STUDY ON ANTI-SLIDING COEFFICIENT OF FRICTION TYPE HIGH-STRENGTH BOLT CONNECTORS
摩擦型高强度螺栓连接件抗滑移系数试验研究
13.
Treatment method of the high strength bolt friction type connection interface
高强度螺栓摩擦型连接接触面的处理方法
14.
Analysis of Hydrogen Embrittlement Sensitivity of High-strength Bolt Under H_2S Environment
高强度螺栓在H_2S环境下氢脆敏感性分析
15.
Modeling and Simulating of Stress Corrosion Cracking in High Strength Bolt
高强度螺栓应力腐蚀断裂过程的建模与仿真
16.
Research on Ultimate Capacity of High-strength Bolt Connection of Steel Structure at High-temperature;
高温下钢结构高强度螺栓连接极限承载力的研究
17.
Experimental Study of the Behavior of the High-strength Bolted Connections in High-temperature;
高强度螺栓连接在高温环境下受力性能的试验研究
18.
Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T3633-1995钢结构用扭剪型高强度螺栓连接副技术条件