1.
Study on Progressive Failure Mechanism and Determination of the Toe Segment Slippage Length for Large Consequent Slope;
长大顺层边坡渐进失稳机理及首段滑移长度确定的研究
2.
An Optimization Method for the Contact Slip Length of Space Electromagnetic Relay Based on Uniform Experimental Design
基于均匀试验设计的航天电磁继电器触点滑移长度优化
3.
The Relationship Between Extrudate Swell Ratio and the Length of Slip Part in Gas-Assisted Extrusion
气辅挤出胀大比与滑移段长度的关系
4.
Analysis on Mode Experiment of Large Consequent Slope's Instability
长大顺层滑坡滑移失稳模型实验分析
5.
Distribution Parameters of Dislocation Link Length Related with Various Slip Area and the Fraction of Mobile Dislocation Density
位错链长分布参数与可动位错密度分量及滑移面积的关系
6.
Analysis of the Tool-Chip Contact Length and the Cutting Force in the Microcutting Applying the Slip-Line Theory;
基于滑移线理论的微切削刀—屑接触长度和切削力研究
7.
Influence of Slip Length of Gas-Assisted Extrusion Die on Pressure Drop and First Normal Stress
气辅挤出口模中滑移段长度对压力降和第一法向应力差的影响
8.
Slip Length of Gas-Assisted Extrusion Die Influence on Die Swell Ratio
气辅挤出口模中滑移段长度对挤出胀大比的影响研究
9.
Move slider to adjust pace for "Press-to-Select."
移动滑杆来调整“按压选择”的速度。
10.
Refined Newmark sliding method based on average yielding acceleration
平均屈服加速度的Newmark滑块位移法
11.
AN EXTENDED SECOND ORDER SLIP BOUNDARY CONDITION FOR MICRO FLOWS
微尺度流动的扩展二阶滑移边界条件
12.
Experimental Research on the Dependence between Liquid Viscosity and Boundary Slip
黏度对流固界面滑移影响的试验研究
13.
Temperature stress analysis of high accuracy rocket sled rail
高精度火箭橇滑轨长轨温度应力分析
14.
translation gliding
平移滑动, 直移滑动
15.
variable length shift register
可变长度移位寄存器
16.
significant long-drift motion
大幅度长周期漂移运动
17.
Move the length positioning(4), the machining aluminium materals can be confirmed then.
移动长度定位器()可确定加工件长度.
18.
In the Pointer Trail area, drag the Length slider.
在“指针尾部”区，拖动“长度”滑杆。