1.
A Study on Forming Processes of Conical Cups with TA2M Titanium Alloy Sheets
TA2钛合金锥形件室温成形工艺研究
2.
Study on Forming Conditions for One-Operation Deep Drawing in Conical Part of Thin Wall;
薄壁锥形件一次拉深成形极限条件研究
3.
Optimum Design of a Forming Roller for Power Spinning Process of Conical Parts with Transverse Inner Ribs
带横向内筋锥形件强旋成形过程旋轮优化设计
4.
Research on the Cylindrical Cup by Hydrodynamic Deep Drawing Based on Numerical Simulation
基于数值模拟的锥形件充液拉深工艺研究
5.
The paper introduces the principle of shaping high conic parts by using curved face transition method and the way to define the shape transition.
介绍了用曲面过渡法成形高锥形件的原理及确定过渡形状的方法。
6.
Research on the Power Spinning of Cone Parts with Discontinuous Wall Thickness Using 3D FEM and Experimental Investigation;
突变壁厚锥形件强力旋压成形有限元模拟和试验研究
7.
Analysis and Numerical Simulation of Cold Extrusion Forming Process on Thin-walled and Cone-shaped Part;
薄壁方锥形件冷挤压变形过程的分析及数值模拟
8.
The Research on the Limit Parameters for One-Operation Forming the Conical Part in Deep Drawing;
圆锥形零件一次成形极限参数的研究
9.
Superplastic Forming of Allotype Cone Made of TA15 Titanium Alloy
TA15钛合金异型锥筒形件超塑成形
10.
Forming Technology Study of Long Conical Deep-hole Components Made of 30CrMnSiNi2A
30CrMnSiNi2A长锥形深孔件成形技术研究
11.
Numerical Simulation and Experiment on Hydroforming of Cone-box Shaped Part with Differently Slope Side Walls;
具有不同锥度侧壁的浅锥盒形件液压成形的数值模拟与实验研究
12.
Countersunk external toothed lock washer for assembly
GB/T9074.28-1988组合件用锥形锁紧垫圈
13.
unibolt coupling
带锥形台肩的单螺栓管子联接件
14.
Research on Rolling Technology of Conical Ring with Inner Steps and Ring Rolling Mill;
内台阶锥形环件轧制工艺与设备研究
15.
Research on Cross Wedge Rolling of Cone-shaped Shaft Parts Based on Numerical Simulation
基于数值模拟的锥形轴类件楔横轧成形研究
16.
Process Analysis and Die Design of Three-Face Cone Part
面锥形零件的成心形工艺分析及模具设计
17.
special taper thread tap for gas cylinder
气瓶专用锥形螺纹丝锥
18.
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件