1.
Interpolation Selection and Comparison in the Crack Compliance Method;
裂纹柔度法插值函数选择和实验对比
2.
Error Analysis and Treatment in Residual Stress Detecting for Crack Compliance Method
基于裂纹柔度法的残余应力检测误差分析及处理方法
3.
The energy release rate can also be established experimentally from measuring the compliance of the cracked body.
能量释放率也可用实验方法测量裂纹体的柔度而建立起来。
4.
The particular advantage of the compliancemeasurement method is that the loading fixtures used can be identical to those needed for fracture tests or crack-propagation tests of materials.
柔度测量法的特殊优点是可以使用材料断裂试验或裂纹扩展所用的加载夹具。
5.
The effect of these nonlinearities can be avoided by determining compliance at the same maximum load for all crack lengths investigated.
这些非线性效应，可在测定所有裂纹长度的柔度方法时，采用最大载荷不变的方法予以消除。
6.
Study of Residual Stress Measurement Technique in Metallic Strip Using Crack Compliance Method;
基于裂纹柔度的金属板带残余应力分析研究
7.
The compliance-calibration specimen has a slot of finite-tip radius in place of a crack.
柔度算定试样是用一个有限端部半径的槽来代替裂纹。
8.
Standard test method for surface-crack fracture toughness Kle of metallic plates
GB/T7732-1987金属板材表面裂纹断裂韧度Kle试验方法
9.
A Method for Static Deflection Analysis for Cracked Timoshenko Beam
一种Timoshenko裂纹梁的静力挠度分析方法
10.
Two-dimensional Stress Intensity Factors by BEM with Crack Closure Integrals
边界元法结合裂纹闭合积分求二维裂纹应力强度因子
11.
Shielding Effect Rule of Thermal Fatigue Crack Net and Calculating Method of Stress Intensity Factor of Main Crack
热疲劳裂纹网的屏蔽规律及主裂纹应力强度因子的计算方法
12.
DSIF computation of dynamic crack growth with non uniform velocity by TDBEM
非匀速动态裂纹应力强度因子的边界元算法
13.
Study on Method for Calculating Stress Intensity Factor of Structural Surface Crack;
结构表面裂纹应力强度因子计算方法研究
14.
Research to Calculate Stress Intensity Factor of Mixed-Mode Three-Dimensional Crack
复合型三维裂纹应力强度因子计算方法的研究
15.
Evaluation of the stress intensity factor of the crack close to the surface by the boundary element method
边界元法计算浅表面裂纹应力强度因子
16.
STUDY OF THE COMPUTATION OF STRESS INTENSITY FACTOR BY STRESS FIELD INTENSITY
应力场强计算裂纹应力强度因子的方法研究
17.
The Caculation of Stress Intensity Factor of 3D Crack with FEM
用有限元法求解三维裂纹的应力强度应子
18.
Finite Element Analysis Method for the Stress Intensity Factor of Surface Cracks
块体表面裂纹应力强度因子有限元方法研究