1.
Effect of bending angle on hydroforming of curved hollow components
弯曲角度对弯曲轴线件内高压成形的影响分析
2.
The temperature and the deformation fields of the forming process were calculated and the final bending angle was predicted.
计算了弯曲成形过程的温度场及变形场，预测了钢板的最终弯曲角度。
3.
Bent or angled like a hook.
钩状的象钩子一样弯曲或成角度的
4.
A short angled or curved line on a letter.
字母弯曲之处字母上的曲线或带角度的短线
5.
having or marked by bends or angles; not straight or aligned.
有弯曲、角度或以此为特征；不是直的或成列的。
6.
common Indian antelope with a dark back and spiral horns.
印度普通的羚羊，角为深色并呈螺旋状象后弯曲。
7.
The Bending of Isotropic Shellow Spherical Shell Supported by Corner Colums of Panels with Uniform Thickness;
角点支承的等厚度各向同性球面扁壳的弯曲
8.
Stochastic Variability Analysis of Bending Angle in Sheet Metal Laser Forming Process
金属激光弯曲成形角度的随机变异性分析
9.
The scales of Libra will hang awry until Aries props them up with its curving horns.
天平座的刻度会歪曲地悬挂，直到白羊座用弯曲的角把它纠正。
10.
Cut, threaded, and bends pipe to required angle, using pipe cutters, pipe-threading machine, and pipe bending machine.
用切割器、螺纹机、曲器，针对要求的角度来切割、螺纹、弯曲水管。
11.
cause to assume a crooked or angular form.
引起弯曲或有角的形式。
12.
The inner curve is angled correctly under the presser foot and is left flat
凹的弯曲部位以正确的角度放在压脚下,并且放平。
13.
As a consequence of this angular velocity, the field of the relative air flow past the airplane is curved.
由于存在角速度，通过飞机的相对气流流场是弯曲的。
14.
Having a horizontal surface without a slope, tilt, or curvature.
水平的具有无倾斜度、倾斜角或弯曲的水平平面的
15.
repeated bending stress strength
反复弯曲疲劳强度极限
16.
The beam has a constant flexural rigidity.
该梁具有常数弯曲刚度。
17.
Gentle bending, is put into use apply to curves and surfaces, or the corner, but many-sided.
柔和弯曲,适用于曲线、曲面或角落，可多方面使用。
18.
Bending behaviors of functionally gradient piezoelectric curved cantilever was studied.
研究了弯曲型梯度功能压电悬臂梁的弯曲特性。