1.
LOGISTRIP automatic system
油船自动装卸压载系统
2.
Study on Design of Unloading System of Wood-based Panel Press
人造板热压机卸压机构的设计和研究
3.
Reactor Containment Decompression and Filtration in Qinshan NPP Phase Ⅱ;
秦山二期安全壳超压后的过滤及卸压
4.
Simulation Research on the Dynamicproperty of On-Off Cartridge Valve and the Pressuer Descending Property of Unloading Cartridge Valve
插装阀动特性与液压机预卸荷插装阀组卸压特性仿真研究
5.
The principle and application of automatic cut-off device for pressure relief of accumulator
蓄能器卸压自动截止装置原理及应用
6.
Research and Application of Hydraulic Flushing Improving Permeability and Relieving Pressure Technology
水力冲孔卸压增透技术的研究与应用
7.
Remove volt/amp tester.
拆卸电压/电流测试器。
8.
hydraulic hitch system with unloading function
卸荷式液压悬挂系统
9.
taper coordinated oil-pressure dismantler
锥度配合油压拆卸工具
10.
air driven rockerloader
压气式铲斗后卸装载机
11.
pressure regulator of engine unloading valve
发动机卸荷阀调压器
12.
Remove the high pressure choke and kill hoses from the slip joint.
从伸缩节上卸开高压放喷和压软管。
13.
The Simulation of the Main Hydraulic Cylinder Unloading Impact on 15MN Forging Machine
15MN锻造液压机液压系统卸荷冲击仿真
14.
Air compressor found abnormal, dismantled, checked, repaired and reassembled.
发现空压机不正常，已进行拆卸、修、复。
15.
Remove turbocharger oil feed line.
拆卸透平增压器输油管路。
16.
Hydraulic Valve Tappet Removal/Installation Tool
液压阀推杆拆卸/安装工具
17.
Do not remove collar bushing with valve under pressure.
在阀门处于压力状态下,不要拆卸轴环。
18.
Remove the relief valve cover bolts while holding the cover down.
边压住阀盖，边拆卸安全阀阀盖螺栓。