1.
Strip roughness must not exceed 40 microinch (1.0 micron) in order to achieve these minimum coat weights.
板面粗糙度不能超过40微寸(1.0微米),以达到最低镀层重量。
2.
Zinc-coated steel wire-Test method for weight of zinc coating
GB/T2973-1991镀锌钢丝锌层重量试验方法
3.
Mass Calculation of coating (For equal coating)/MM
锌镀层质量(两个相同锌镀层厚度)
4.
Grade, Plating type, Designation of Coating Mass & Common Coating Mass
级别、电镀方法、镀层质量及常用称号
5.
Silver-antimony Alloy Coating and Antimony Content Analysis;
银-锑合金镀层及镀液中锑含量分析
6.
Effects of pH values on the quality of plated Ni-W alloy coating
pH值对镍钨合金镀层电镀质量的影响
7.
Effect of temperature on the quality of electro-deposited Nickel-Tungsten coating
温度对镍钨合金镀层电镀质量的影响
8.
Influence Factors for Ni Content in Zn-Ni Alloy Coating and the Coating Corrosion Resistance
Zn-Ni合金镀层中Ni含量影响因素及镀层耐蚀性
9.
Control and Research on Surface Quality of Galfan Alloy Coating with Single Hot-dipping on Steel Wire;
单镀Galfan合金钢丝镀层表面质量的控制与研究
10.
Effect of Cr~(3+) on Performance of Cr Plating Solution & Cr Plating Layer Quality;
三价铬对镀铬液性能及镀铬层质量的影响
11.
Effect of Sn(Ⅳ) on Corrosion Resistance of Tin Coatings in PSA Tin Plating Bath
PSA镀锡液中Sn(Ⅳ)含量对镀层耐蚀性的影响
12.
Effect of Cathode Current Density on Quality of Ni-W Alloy Coating
阴极电流密度对电镀Ni-W合金镀层质量的影响
13.
Internal Stress and Co Content of Pulse Electrodeposited Ni-Co Alloy Coatings
脉冲镀Ni-Co合金镀层内应力及钴含量的研究
14.
Evalution on Surface Quality of n-Al_2O_3/Ni-P Composite Electroless Plating
n-Al_2O_3/Ni-P化学复合镀镀层表面质量评价
15.
Safeguard of Solution and influence of Impurities for Non- Cyaniding Silver Electroplating
无氰镀银溶液的维护及杂质对镀层质量的影响
16.
EXISTENCE OF 1,4-BUTANEDIOL IN BRIGHT Ni-BATH AND ITS EFFECT ON THE BATH AND PLATING
亮镍镀液中的1,4-丁二醇及其对镀液性能和镀层质量的影响
17.
Vacuum Metal Deposition for Development of fingerprints:Influence of Quantities of Gold on Size and Density of Clusters
真空金属镀膜显现指印:镀金量对镀层尺寸和密度的影响(英文)
18.
Effects of NiSO_4 content in plating bath on the quality of Ni-W alloy coating
镀液中硫酸镍浓度对镍钨合金镀层电镀质量的影响