说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 熔体吹气发泡法
1.
Numerical simulation of production processes of aluminum foams using air injection and melt stir
熔体吹气发泡法制备泡沫铝的准三维数值模拟
2.
Experimental Study and Numerical Simulation on Bubble-melt Two-phase Flow with Gas Injection and Mechanical Stirring Relevant to the Aluminum Foam Processing;
吹气搅拌法制备泡沫铝工艺的气泡—金属熔体两相流的实验研究和数值模拟
3.
Al-Si foam was fabricated by direct melt foaming.
采用熔体发泡法制备泡沫铝硅合金。
4.
Preparation by the Means of MFT and Investigation of the Properties of Aluminum Alloy Foam;
泡沫铝的熔体发泡法制备及其性能研究
5.
Preparation and Analysis on the Defects of Aluminum foams via Melt-foaming method
熔体发泡法制备泡沫铝合金及其缺陷分析
6.
Computer Simulation for Flow of Plastic Melts and Film Bolwing;
计算机模拟塑料熔体的流动及膜泡吹胀过程
7.
Research on Key Technologies for Batch Preparation of Aluminum Foam Slabs by Melt Foaming Process
熔体发泡法批量制备泡沫铝板材关键技术的研究
8.
The Structure and Its Characteristics Analysis of Aluminum Foam Ingot Fabricated by Molten Frothing Process Using SiC Particles Adhered Melt
SiC颗粒自增粘熔体发泡法制备泡沫铝铸锭的组织及其特征分析
9.
Development Study on Different Blowing Stirring Mode in BOF Bath
转炉熔池不同吹气搅拌方式开发研究
10.
Lead smelting technology and the development of oxygen bottom blowing melting process
铅冶技术的发展及氧气底吹熔炼工艺
11.
Study on the Viscosity Control of Foam Aluminum Melt and the Bubble's Stability
泡沫铝熔体粘度的控制与气泡稳定性研究
12.
The production and control of bubbles in melting process of float glass
浮法玻璃熔制过程气泡的产生及控制
13.
Analysis of degassing efficiency of porous brick to purify molten aluminum
透气砖底吹净化铝熔体的除气效率分析
14.
Research on the High-Melt-Strength Polypropylene for Foaming Prepared by Reactive Extrusion;
反应挤出法制备发泡用高熔体强度聚丙烯的研究
15.
BOTTOM GAS STIRRING AND SMELTING TECHNOLOGY OF DEEP BATH FOR DC EAF
直流电弧炉底吹气体搅拌加深熔池冶炼技术
16.
The Investigation of Degassing and Purification Technology of Molten Aluminium Alloys by Rotary Impeller;
铝合金熔体旋转喷吹除气净化技术的研究
17.
Introduce the application of the optical image technology in the study of formation of microcellular foams to observe the nucleation and growth of bubbles.
提出了在微孔泡沫塑料的成型研究中,利用光学成像技术来观察挤出熔体中的发泡情况的方法。
18.
Numerical Simulation of the Geometry and Moving Behavior of Bubbles in Molten Metal;
金属熔体中气泡几何及运动特性的数值模拟