1.
MICROSTRUCTURE ANALYSIS OF TWO CARBON BRICKS CORROSIONED WITH DIFFERENT MOLTEN IRON
两种不同铁水熔蚀炭砖微观结构分析
2.
Copper Dissolution:A New Industry Challenge
铜熔蚀——PCB产业的一个新挑战
3.
glass level cut
液面线侵蚀(熔融玻璃对池壁的侵蚀)
4.
To remove by erosion, melting, evaporation, or vaporization.
消融，侵蚀由于腐蚀、熔化、蒸发或汽化而消失
5.
Pressureless Sintering of SiC and Its Mechanism of Corrosion by Molten Salts
碳化硅的常压烧结及其熔盐侵蚀行为
6.
Research on Laser Cladding Wear and Corrosion Resistance Layers on 45# Steel
45钢表面激光熔覆耐磨耐蚀涂层研究
7.
Study on Anticorrosion and Antiwear Coatings Manufactured by High Frequency Induction Cladding
高频感应熔覆制备耐蚀耐磨涂层研究
8.
Study of Corrosion Resistant Coating on 45# Steel Fabricated by Laser Surface Cladding
45~#钢激光表面熔覆耐腐蚀涂层研究
9.
Study on the Property of Cavitation Erosion of Nickel-based Self-fluxing Alloy Ni67
镍基自熔合金Ni67的空蚀磨损特性研究
10.
Corrosion Resistance of NiCrBSiC Alloy by Laser Cladding
激光熔覆NiCrBSiC合金耐蚀性能研究
11.
Effect of laser cladding layer of Al_2O_3 on the corrosion of nickel-based alloys
Al_2O_3对激光熔覆镍基涂层腐蚀性的影响
12.
Selection of Materials of Cast Iron Crucible for High-Temperature Aluminum Melting with Respect to Corrosion Resistance
从耐腐蚀性能看高温熔铝坩埚的选材
13.
CORROSION BEHAVIOR OF NICKEL BASE ALLOY FGH95 IN MOLTEN NaCl-Na_2SO_4
镍基合金FGH95在熔融NaCl-Na_2SO_4中的腐蚀行为
14.
Microstructure and Erosive-corrosive Wear Characteristics of Induction Cladded Ni/Cr_3C_2-NiCr Coating
感应熔覆Ni基合金/碳化物熔覆层的组织与冲蚀磨损性能
15.
silver nitrate fused into sticks and formerly used as a caustic.
熔化成条状的硝酸银，以前用作一种腐蚀剂。
16.
The erosion of metals varied depending largely on the melting point.
金属的烧蚀在很大程度上随熔点而变化。
17.
Study on Corrosion Resistance of Zircon AZS-Bonded Ramming Mix Used for Glass-Kiln
电熔锆刚玉结合锆英石捣打料抗蚀性能的研究
18.
Study on Corrosion Behaviors of Three Types of Stainless Steel in Molten LiCl-Li_2O;
三种不锈钢在熔融LiCl-Li_2O中的腐蚀行为研究