1.
Mechanical Properties and Fracture of the Super-Tough PA6/ABS Alloy
超韧PA6/ABS合金性能和断口形貌研究
2.
The fractures of the alloys change from dimple to cleavage fracture with river pattern.
合金的断口形貌由韧窝向河流花纹状的解理形貌转变。
3.
The Study of the Process and the Rupture on the Explosion Welding-Rolling Ti-steel Composites Plate;
爆炸焊接—轧制钛钢复合板——工艺和断口形貌研究
4.
A Study on the On-line Prediction of Fracture Appearance Transition Temperature of 2.25Cr-1Mo Steel;
2.25Cr-1Mo钢断口形貌转变温度在线预测方法研究
5.
An Investigation on Fracture Morphology Differences between Gray Irons with A-Type and D-Type Graphite
A型和D型石墨合金灰铸铁断口形貌对比研究
6.
The Effect of Permanent Mold on the Arm-Spacing and the Fatigue Fructographies of the Low Chromium V-Ti White Cast Iron;
金属型铸造对低Cr─V─Ti白口铸铁枝晶间距和断口形貌的影响
7.
The toughness, fractograph and microstructure of the failed die specimens have been examined and analysed.
检测了失效模具材料的微观组织、击韧性和断口形貌。
8.
ON THE RELATION BETWEEN INCLUSIONS AND MORPHOLOGY OF DIMPLE FRACTURES IN CERTAIN STEELS
中碳镍铬钼钢中夹杂物和韧窝断口形貌关系的初步观察
9.
Influence of B Refinement on Mechanical Properties and Fracture Surfaces of Hypoeutectic Al-Si Alloy
B细化处理对亚共晶铝硅合金力学性能和断口形貌的影响
10.
Quantitative Study of Macroscopical Metallic Fracture Surface Roughness
金属断口宏观形貌表面粗糙度的定量研究
11.
The fracture appearance is dimple at room temperature,it changes into intercrystalline fracture at low-temperature.
其冲击断口微观形貌由室温时的韧窝断口逐渐变为低温下的塑性沿晶断口.
12.
Fractographic analysis of failed fragment of In-Ceram alumina crown
应用断口表面形貌分析法分析临床失败In-Ceram全瓷冠1例
13.
Impact Fracture Curve and Fractured Surface Morphology of PA 6/POE Blends
PA 6/POE冲击断裂曲线及断面形貌
14.
THE EFFECT OF MOLYBDENUM POWDER MORPHOLOGY ON FRACTURE PROPERTIES OF MOLYBDENUM WIRE
钼粉形貌对钼丝断裂性能的影响研究
15.
Fractography Analysis on Dynamic Fracture in Rock
岩石动态断裂耗能机制的形貌学分析
16.
The composite displays the fracture features of the dimple and intergranular fracture.
复合材料的断裂形貌为韧窝加沿晶断裂。
17.
The fractograph exhibited typical ductile dimple fracture pattern.
断裂形式呈韧性断裂,断口以韧窝为主。
18.
Characteristics Extraction of Metallic Corrosion Morphology for Corrosion Diagnosis;
金属腐蚀形貌特征提取用于腐蚀诊断的研究