1.
Analysis of stamping technology and design of drawing die for car front floor boarding
汽车前底板冲压工艺分析与拉深模设计
2.
Disengage fascia from hooks on bottom of front fenders.
将面板从前挡泥板底部的挂钩上取下。
3.
When delivering boards.electric eye can scan cutting function to front segment and rear segment of middle and bottom board.
电眼装置送板时来侦测，中板底板料之前段与后段作剪切的作用。
4.
Surface condition of plates before shot blasting and priming.
板材在喷砂处理和涂装底漆之前的表面状况。
5.
Drawer bodies will have bottom and sides formed into one piece center section. Front and back panels are spot-welded to center section.
抽屉底部和两边为单片设计。前、板面为点焊。
6.
Install the screw attaching the front of the end cap to the underside of the quarter panel.
安装连接末端端盖前侧到部分板底侧的螺丝。
7.
Spreading the lower side of the front panel plate outward( arrow B), detach the plate from the body.
向外侧拉伸前面板框的底边（头B）把板从机体上卸下。
8.
turning-over board
翻箱板，造型平板，底板
9.
stone gobber
【采矿】底板清理工
10.
bilge board
(船底)活水道盖板
11.
Sufficient anterior decompression of spinal cord, placement of a tricortieal bone graft, reduction of cervical anterior column and fixation of anterior plate lead to a satisfactory clinical results.
操作时应彻底解除脊髓前方压迫，植入三面皮质骨块，恢复前柱正常前凸，再行前路钢板固定。
12.
splash mat with a base of felt paper or paperboard
防溅板,以纸或纸板为底
13.
Base cabinets are reinforced with internal reinforcing front and rear posts and will have shelf-clip adjustment holes.
底柜前部和后部支撑有加强筋，筋上有隔板调节孔。
14.
It is expected that China Finance Online will be made its IPO by the end of this month and listed on NASDAQ next month.
据估计「中国金融界」本月底前拍板上市，最快下月可以在纳市挂牌。
15.
Our boss told us not to worry about low priority tasks until the end of the month.
老板告诉我们，月底前先不用管那些不那么重要的任务。
16.
Be careful not to pull off the plastic parts attached to the lower side of the unit together with the front panel plate.
当心不要把本机底面上的塑料部件和前面板框一起拉下。
17.
It involves putting a layer of cardboard at the bottom of a rubbish compactor before filling it with waste material, and then putting another layer of cardboard on top.
这也就需要在垃圾捣碎机被填满之前在其底部放置一层纸板，然后在其顶部也放置一层纸板。
18.
A long, narrow, runnerless sled constructed of thin boards curled upward at the front end.
平底雪撬一种由薄板制成的狭长的无滑板雪撬，在前方末端向上卷起