1.
Vibration equations of the thick flat shells by transverse shearing deformation
考虑横向剪切变形厚扁壳的动力方程
2.
Displacement fundamental equations of the thick plates bending and the general solution to simply supported rectangular plates by transvers shearing defomation
考虑横向剪切变形厚板弯曲的位移型方程及简支矩形板的一般解
3.
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
4.
STUDY ON CUTTING FORCE IN RECTANGULAR GROOVE CUTTING AND SIDE DEFORMATION OF CHIP
矩形槽切削的切削力及切屑横向变形的研究
5.
Research on Wavefront Character and Reconstrution Based on Lateral Shearing Interference;
横向剪切干涉的特性研究和波面重建
6.
Buckling of compressed bar subjected to combined effect of axial loads considering shear deformation
考虑剪切变形时轴向载荷联合作用下压杆屈曲
7.
multiple beam lateral-shear interferometer
多光束横向切变干涉仪
8.
cross shearing machine
横向剪毛机,纬向剪绒机
9.
crosscutting machine
横向剪毛机,纬向剪毛机
10.
Transverse shear is due it that impact loading is not instantaneous.
由于冲击加载并不是瞬时的,这导致了横向剪切.
11.
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形
12.
longitudinal and transverse shear for aluminium and alloy
铝及金属纵横剪切机
13.
Influence of Shear Lag and Shear Deformation on the Vibration of Thin-Wall Box-Girder
剪力滞后剪切变形对薄壁箱梁的振动影响
14.
The shearing strain is essentially inhomogeneous flow of metal.
剪切变形的实质是金属的不均匀流动。
15.
Rectangle blade with four functional cutting edges is very durable.
◆ 剪切角可调，减少板料扭曲变形。
16.
Without loss of generality, shear deformations will be neglected.
不失一般性，忽略不计剪切变形。
17.
Analysis for Deformation and Shear Zones of Reinforced Embankment;
加筋路堤变形特性和剪切屈服区分析
18.
Analysis of Shear Deflection of Flat Steel Box Girder of Cable-Stayed Bridge;
斜拉桥扁平钢箱梁剪切变形效应分析