1.
Research about the Rolling Temperature Model and Its Influencing Parameters of Cold Tandem Mills;
冷连轧机轧制温度模型及其影响因素的研究
2.
Prediction of Rolling Temperature of Medium and Heavy Plate Based on GRNN Neural Network
基于GRNN网络的中厚板轧制温度的预测
3.
The results show that the bonding is good when the temperature, two passes deformation ratio of rolling are1250℃,50% respec tively.
结果表明：轧制温度为1250℃两道次的轧制变形率为50％，界面结合较好。
4.
according to the temperature of the metal being rolled, rolling processes can be classified as hot rolling and cold rolling. and the rolled products can thus be specified as hot rolled or cold rolled products.
根据轧制轧材的温度，轧制可分为热轧和冷轧;因而轧制产品也可分为热轧产品和冷轧产品。
5.
On the Model of Prediction Temperature and Rolling Force Model in Splitting Caliber for Continuous Rolling Steel Angles
角钢连轧温度预报与切分孔轧制力模型
6.
Adaptation strategy of finishing temperature control for hot strip rolling
热连轧精轧温度控制的自适应策略研究
7.
The Temperature Simulation of 72A High-Carbon Steel Wire during Rolling Process;
72A高碳钢轧制过程中的温度模拟研究
8.
H_∞ robust control for coiling temperature in hot rolling processing
热轧带钢卷取温度的H_∞鲁棒控制
9.
Effect of Roll Gap Geometry and Rolling Temperatures on the Evolution of Deformation Textures and Microstructure in Rolled Non-oriented Silicon Steel
轧制几何和温度因素对无取向硅钢轧制形变织构及组织的影响
10.
Numerical simulation of effect of temperature gradient on rolling of magnesium alloy sheets
温度梯度对镁合金板材轧制影响的数值模拟
11.
The Application of Fuzzy Control in Cold-rolling Pickling Line Temperature Control;
模糊控制在冷轧酸洗线温度控制中的应用
12.
Application of Rules Self-Optimizing Fuzzy Controller to Rolling Temperature Control
规则自寻优模糊控制在轧钢温度控制中的应用
13.
Study on Temperature Field and Thermal Profile of Work Roll in Sheet and Strip Rolling;
板带轧制过程工作辊温度场与热辊型研究
14.
Numerical Simulation of The Slab Temperature Field Based on ANSYS;
基于ANSYS的中厚板轧制前板料温度场数值模拟
15.
The Coiling Temperature Control System of 1780mm Hot Strip Line at Anyang Steel
安钢1780mm带钢热连轧卷取温度控制系统的分析
16.
Math Model for Temperature prediction of Heavy Rail during Universal Tandem Rolling Process
重轨万能连续轧制过程温度预报的数学模型
17.
2D Temperature model and control strategy for the Laminar cooling system of 1780mm Hot Strip Mill
1780热连轧层流冷却二维温度模型及控制策略
18.
Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling
恒刚度轧制改善R0粗轧机的轧制板形