1.
Determination of film hardness by pencil test
GB/T6739-1996涂膜硬度铅笔测定法
2.
The hardness designation of the pencil that just fails to cut the film is the pencil hardness of the film.
刚好不能够将涂膜刺破的铅笔硬度的确定为涂膜表面的硬度。
3.
This resin has good alkali and water resistance and proper stiffness, thus suitable for the use as a coat for fiberglass meshes.
这种树脂成膜后具有良好的耐碱、水性和硬挺度,可用作玻璃纤维网布涂层。
4.
Hardness and resistance to cavitation erosion of Fe-Cr-based HVOF-sprayed coating
超音速火焰喷涂Fe-Cr基涂层的硬度与汽蚀性
5.
Influence of arc spraying parameters on the property of hardness of Ni-Cr-Al coating
热喷涂工艺对Ni-Cr-Al涂层硬度性能的影响
6.
The servicee life of the coating is directly proportional to the thickenss applied.
涂层的保护寿命直接与涂膜厚度成正比。
7.
Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.
测试了喷涂层的结合强度、硬度以及抗热震性能。
8.
testing method for evaluating degree of cracking of dried film ofpaints
涂料干膜破裂程度评价的试验方法
9.
The fineness of fly ash influences on the solidifying velocity and coating film performance of polyurethane waterproof coating.
粉煤灰的细度对防水涂料的固化速度和涂膜性能都有影响。
10.
The best film thickness of MDF powder coating
中密度纤维板静电粉末喷涂工艺的最佳涂膜厚度研究
11.
Thermal sprayed metallic coatings--Rockwell hardness test
GB/T8640-1988金属热喷涂层表面洛氏硬度试验方法
12.
Design & Opttimization Principle of High Hardness Waterborne Coating
高硬度水性木器涂料的设计与优化原理
13.
Metallographic Observation on the Gradient-structured Coated Tips Made by Cemented Carbide
梯度结构硬质合金涂层刀片的金相观察
14.
Study on High-hardness Nickel-based Self-fluxing Alloy Coating Remelted by High Frequency Induction Remelting
高硬度镍基自熔合金涂层高频感应重熔研究
15.
Prepare of a High Hardness Anodize Oxidation Film on 6061 Aluminum Alloy Sheet
6061铝合金薄板高硬度硬质阳极氧化膜的制备
16.
Relationship between efficacy of the epidural anesthesia for hysterectomy with the unblocked degree of epidural catheter
硬膜外导管通畅度与子宫切除术患者硬膜外麻醉效果的关系
17.
Something, such as the latex in certain paints, that creates uniform consistency, solidification, or cohesion.
粘合剂可产生均匀的浓度、硬度和粘着度的某物，如涂料中的乳剂
18.
Determination of hardness of the paint films--Pendulum damping test
GB/T1730-1993漆膜硬度测定法摆杆阻尼试验