说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 支撑部位
1.
The Analysis of Reinforcement for the Trolley Frame Supporting Position of the Bridge Crane
天车小车架支撑部位几种加固方案的分析
2.
A part similar to a human arm, such as the forelimb of an animal or a long part projecting from a central support in a machine.
臂状物与人体上肢相似的部分,如动物的前肢或机器上从中间支撑部位伸出的部分
3.
Supported by or lying over something that projects.
突出部位支撑或位于突出部位上面的:
4.
Features of displacement at the top of enclosure piles and analysis of the stiffness formula of bracing system
围护桩顶部位移特征及内支撑刚度公式辨异
5.
free to deflect [unbraced]
自由变位〔无横向支撑〕
6.
bottom-supported fixed platform
底部支撑的固定式平台
7.
A yoga body ball and a body-sculpting workout help you target and tone your abs, arms, thighs, and buttocks, quickly and effectively.
瑜珈球用来支撑身体的某定点部位,以完成特定的瑜珈动作.
8.
In a fixed-head magnetic disk unit, a support and positioning element for a read / write head.
在固定磁头的磁盘机中,用于支撑和定位读/写磁头的部件。
9.
a cavalry unit consisting of two or more troops and headquarters and supporting arms.
包括两个或更多军队、总部和支撑武器的骑兵单位。
10.
A rest or support for the back.
背靠背部的支持物或支撑物
11.
a brace that extends from the rear of the keel to support the rudderpost.
从龙骨后部延伸出的支撑舵轴的支柱。
12.
8 All poles, legs, or uprights of scaffolds shall be plumb and rigidly braced to prevent swaying and displacement.
所有的脚手架支柱、支架或上部构件都必须垂直并牢固拉撑,以防摆动和位移。
13.
A triangular section of vaulting between the rim of a dome and each adjacent pair of the arches that support it.
方墙四角圆穹顶支承拱位于顶穹边缘和每对相邻支撑圆拱之间拱形结构的三角形部分
14.
And the fusing of bones making up the lower jaw fortified this region, facilitating the presumed“ buccal pump” mode of tetrapod ventilation.
下颔部位骨头的愈合也加强支撑力,帮助可能以口部当做帮浦的形式换气。
15.
restrained from lateral deflection [braced]
侧向变位受箝制〔受横向支撑〕
16.
The Effect to Stability of Steel Members by Bracing Location;
支撑位置对钢构件稳定承载力的影响
17.
Bushings: Furnishes shaft support at three locations for positive shaft alignment and actuator support.
衬套:在三个位置上配置轴支撑,有利于轴校直和执行机构的支撑。
18.
Bushings (4): Furnishes shaft support at three locations for positive shaft alignment and actuator support.
衬套(4):在三个位置上配置轴支撑,有利于轴校直和执行机构的支撑。