1.
The support technics process of "three bolting-anchor" support (bolting and shot-concreting、 anchorage cable、 bolt-grouting) of soft rock roadway is studied in this paper.
本文对软岩巷道“三锚”(锚喷、锚索、锚注)支护的支护工艺过程作了研究。
2.
Application of "Shotcrete and Bolting Cable" Support to Road Repair
“锚注+锚索”支护工艺在巷修工程中的应用
3.
On supporting and reinforcing of strengthen anchor arm and bolting sustaining in soft rock lanway
软岩巷道高强锚杆和锚注支护加固机理分析
4.
The Application about Blot Grouting in“three soft”Drift
锚注法在“三软”巷道施工中的应用
5.
Study about Mechanism of Bolting-Grouting Support Based on Nonlinear Analysis;
基于非线性分析的锚注支护机理研究
6.
Study on Mechanism of Bolting and Grouting Support in Very Broken Rock Renovated Roadway;
极碎围岩整修巷道锚注支护机理研究
7.
Research and Application of Bolting Spouting Technology in Repairing Laneway;
锚注技术在修复巷道中的研究与应用
8.
Reinforcement Technology of Sprayed Concrete with Bar Nets and Anchor Grouting on Failure Earth Retaining Walls
失稳加筋土挡土墙喷网锚注加固技术
9.
The Analysis of Application and Mechanism Theory of the Bolt Combined Bolting-grouting Support in the Soft Rock Roadway;
软岩巷道锚杆和锚注支护共同作用机理研究及应用
10.
Study on the Stability of Jointed Slope and the Effect of Bolting and Grouting Reinforcement Method;
节理裂隙边坡稳定性及锚注加固效应研究
11.
Research on Spraying-Bolting-Grouting Combined Support of Swelling Soft Rock Roadway under High Stress in Deep Mine;
深部高应力膨胀性软岩巷道喷锚注支护研究
12.
resin roof bolting
灌注树脂固定锚杆法
13.
The Reinforcement Mechanics of Fully Grouted Rock Bolt in Underground Engineering;
地下工程中注浆岩石锚杆锚固机理研究
14.
Analysis and Study on Structural Parameters of Flexible Pressurized Anchor and Anchorage Preformance;
柔性注压锚杆结构参数与锚固性能分析研究
15.
The Comprehensive Supporting Technique of the Sparging and Anchoring Net ofinclined shaft in Yangjiacun
杨家村矿斜井锚网喷注综合支护技术
16.
The application for injecting slurry anchor pile in rock dissolve foundation treatment
注浆锚杆桩在岩溶地基处理中的应用
17.
, great attention is paid to the most economic dimension and material cost, under the safety of anchorage device.
在保证锚固效率的同时,锚具的成本成为人们越来越关注的问题。
18.
TESTING STUDY ON THE PEAK SHEAR STRENGTH BETWEEN GROUT AND BORE WALL IN THE INTERIOR BOND SECTION OF PRESTRESSED ANCHORAGE CABLE
锚索内锚固段注浆体与孔壁之间峰值抗剪强度试验研究