1.
Influence analysis and parameter optimization of bubble diameter in Micro-bubbles flotation process
微泡浮选中气泡尺寸影响分析与参数优化
2.
The bubble size is the one significant quantity which determines the conditions in the bed.
气泡尺寸是决定床内情况的一个关键因数。
3.
Bubble Size and Velocity Distribution in Bubble Column Reactor
鼓泡床反应器中气泡尺寸和速率分布的实验研究
4.
Numerical simulation of predict bubble generation diameter of aluminum foam
泡沫铝制备过程气泡生成尺寸的数值模拟研究
5.
The geometry of the vessel and its internals may limit the size of the bubbles.
容器和其内部构件的几何形状可能限制气泡的尺寸。
6.
A Research on Observation and Size Criterion of Primary Gas Bubbles In Semi-solid Precursor
半固态先驱体中初生气泡的观察与尺寸判据研究
7.
Test method for average cell size of rigid cellular plastics
GB/T12811-1991硬质泡沫塑料平均泡孔尺寸试验方法
8.
For design it is important to be able to estimate the maximum expected size of bubbles in a bed.
设计时要能估计出床层中气泡可望达到的最大尺寸这一点是很重要的。
9.
Cellular plastics and rubbers--Determination of linear dimensions
GB/T6342-1996泡沫塑料与橡胶线性尺寸的测定
10.
" Lamps for road vehicles Dimensional, electrical and luminous requirements"
GB15766.1-1995道路机动车辆灯泡尺寸、光电性能要求
11.
An Auto-detecting and Classifying Device of the Size of Plate Level;
水准泡尺寸的自动化检测分选装置及其研究
12.
A FRACTAL STUDY ON MESO STRUCTURES AND SIZE EFFECT OF METALLIC FOAMS
基于分形的泡沫金属细观结构与尺寸效应研究
13.
Outlet connections and sizes for cylinder valves
GB15383-1994气瓶阀出气口连接型式和尺寸
14.
Length (Tip-to-Gauge Dimension Line) Intake
长度(接头-仪表尺寸线) 进气
15.
Full scale burst experiment on high pressure test of gas pipelines
输气管道高强度试压全尺寸爆破实验
16.
full size drawing
原尺寸图，实物尺寸图
17.
foot in the door technique
得寸进尺法得寸进尺法
18.
The Scale Effect of Cavitating Flow on the Jet-Propelled Missile
喷气推进导弹空泡流的尺度效应研究