1.
Study On Longitudinal Surface Cracks On CSP Hot-Rolled Plate
酒钢CSP热轧板卷表面纵裂纹研究
2.
CAUSE ANALYSIS FOR SURFACE LONGITUDINAL CRACKS ON Q235B SLAB
Q235B钢板坯表面纵裂纹的原因分析
3.
Improvement Practice of Reducing Surface Longitudinal Crack of Wide and Thick Slab
减少宽厚板坯表面纵裂纹的改进实践
4.
Analysis and study of surface longitudinal cracks for SS400 steel sheet
SS400钢板表面纵裂纹分析及实验研究
5.
Formation and prevention of grade 20 steel CC bloom surface longitudinal cracking
20钢φ180连铸坯表面纵裂纹的形成与防止
6.
Technics Study of Reducing Longitudinal Surface Crack of Beam Blank
减少连铸异型坯表面纵裂纹的工艺研究
7.
MICROSEGREGATION OF SOLUTE ELEMENTS IN SOLIDIFYING MUSHY ZONE OF STEEL AND ITS EFFECT ON LONGITUDINAL SURFACE CRACKS OF CONTINUOUS CASTING STRAND
钢凝固两相区溶质元素的微观偏析及其对连铸坯表面纵裂纹的影响
8.
The results showed that the major cause of longitudinal surface cracking of20 steel tube blanks was higher nonmetallic inclusion content in the steel than standard value.
结果表明:非金属夹杂物超标是导致管坯表面产生纵向裂纹的主要原因。
9.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
10.
The Forming Reasons and Preventing Measures on Longitudinal Surface Crack of CSP Slab
CSP薄板坯表面纵裂的成因与控制
11.
Causes and Improving Measures of Longitudinal Surface Cracking of SS400 Slab
SS400板坯表面纵裂原因分析与改进措施
12.
CC-slab surface longitudinal crack prediction by using neural networks
基于神经网络的连铸坯表面纵裂预测
13.
No stress measurements or crack surface samples were available for examination, only the surface crack configuration.
没有应力测量或裂纹表面取样可用于检验，只能依据表面裂纹图形。
14.
To cause(china, for example) to become covered with a network of fine cracks.
使（瓷器等）表面出现网状的细裂纹
15.
glazed china with a network of fine cracks on the surface.
表面有网状裂纹的光滑的瓷器。
16.
Cracks grow in directions nearly parrallel to the surface.
裂纹在近乎平行于表面的方向上生长。
17.
A core was removed from this area so that the crack surfaces could be examined.
从这一区域取样芯，以便检验裂纹表面。
18.
BEM Analysis of Transient Response in Surface Crack Problems
表面裂纹问题瞬态响应的边界元分析