1.
The material, mainly expanding perlite with abio-viscose and strengthened material is pressed by pressing machines and dried or warmed by the fire.
主要材料为膨胀珍珠岩，加入无机粘接剂与加强材料经压机压合烘养而成。
2.
Testing method for compressive shear strength of dowel joint by inorganic adhesives
GB/T11177-1989无机胶粘剂套接压缩剪切强度试验方法
3.
Testing method for torsional shear strength of doedl joint by inorganic adhesives
GB/T14903-1994无机胶粘剂套接扭转剪切强度试验方法
4.
The seamless fusing machine belt is longer in service life than that of any seamed teflon conveyor belt.
无缝粘合机带寿命比任何有接缝的铁氟龙输送带寿命都要长。
5.
{Paste link failed.}Cannot connect to server.
{粘贴链接失败。}无法连接服务器。
6.
{The paste link failed.} Badly-defined link format.
{粘贴链接失败。}链接格式无效。
7.
Cement the fuselage bottom cover and wing together as shown in the diagram.
再将机身下罩按图示粘接在机翼上。
8.
The Experimental Study on Vacuum Performance of Non-magnetic Dewar Adhesive Joints
无磁杜瓦粘接接头真空性能的实验研究
9.
Experimental Investigation of the Bonded Rebar Anchorage Properties of Cement Based Inorganic Anchoring Material;
水泥基无机粘结材料植筋粘结锚固性能研究
10.
Preparation of Organic-inorganic Composite Binder by Sol-gel Process
溶胶凝胶法制备有机无机复合胶粘剂
11.
Direct proof of the mechanism of adhesion is quite elusive.
直接证明粘结的机理是十分困难的。
12.
The investigation of adhesion mechanism of the interfaces between polytitanosiloxane gel and Al, or Fe metals
聚钛硅氧烷凝胶与铝、铁界面粘接机理
13.
APPLICATION OF ANAEROBIC ADHESIVE TECHNOLOGY IN MACHINE DESIGN
厌氧胶粘接技术在机械设计中的应用
14.
A Study for the Biomechanics of Metallic Orthodontic Bracket of Multiple Bonding;
金属托槽多次粘接的生物机械学研究
15.
Influence factors to the bond strength and stability of aldehyde-free wood adhesive
无醛木材胶粘剂粘接强度和稳定性的影响因素研究
16.
Belt Joint Cold Glue Bind Method of Belt Conveyer Rice Mill
米厂带式输送机胶带接头的冷粘接方法
17.
Cold splicing the joints of the belt conveyer in brick and tile factory
砖瓦厂带式输送机胶带接头的冷粘接方法
18.
THE PRINCIPLE OF CROSSLINKING CHEMICAL REACTION OF SESBANIA CANNABIA PERS GUM NON-CLAY DRILLING FLUIDS
田菁胶无粘土冲洗液的交联反应机理