1.
sidepiercing cam actuated die
侧楔作用侧向冲孔模
2.
Design of an Automatic Dividing Punch Mould for Spokes on Wheel Cranes
轮式起重机轮辐自动分度冲孔模设计
3.
Improvement of spline rod and set of piercing die forbasket type cage
筐形保持架冲孔模花键杆、套的改进
4.
Cracking Analysis of CrWMn Steel Piercing Mould
CrWMn钢冲孔模具加工过程中开裂分析
5.
A Study on Function-Oriented CAD of Panel Trimming and Punching Die Design;
面向功能的覆盖件修边冲孔模CAD系统的研究
6.
The measure of improving life of die without die plate for the hole punching on steel pipe
钢管无凹模冲孔冲头寿命提高的措施
7.
The Analysis and Defense Measure of Thin Punch Destruction
冲小孔凸模破坏形式分析及预防措施
8.
The application of EDM in machining technology for more holes die
电加工在多孔冲模加工工艺中的应用
9.
Mechanism of Small Hole Punching on Thick Blank and Study on Die Life-span;
厚钢板小孔冲裁机理及模具失效研究
10.
Apply ANSYS in Optimizing Eyelet Clearance of Punching Die;
ANSYS在小孔冲模间隙优化中的应用
11.
Design of piercing-blanking progressive die based on Pro/E-PDX
基于Pro/E-PDX的冲孔、落料连续模设计
12.
Numerical simulation of the process of pore collapse under shock load
冲击载荷下孔隙塌缩过程的数值模拟
13.
A new thinking for the design and manufacture of16 J spoke piercing blanking die is introduced.
介绍了16J轮辐冲孔、料模的设计及制造新思路。
14.
SIMULATION OF ACOUSTIC FIELD OF ELECTRIC IMPULSE EQUIPMENT IN WELL BORE FILLING LIQUID WITH FINITE ELEMENT METHOD
充液井孔内电脉冲仪声场的有限元模拟
15.
Analysis of Metal Flow and Die Stress for Eyelet Machine of Seamless Steel Pipe;
无缝钢管管坯冲孔机金属变形及模具受力分析
16.
Finite Element Analysis of Creep Damage in Small Punch Test Specimen at Elevated Temperature;
小冲孔试样高温蠕变损伤的有限元模拟
17.
Calculative methods for the complicated draw-hole sizes in the design of dies;
冷冲模设计中的复杂抽孔尺寸的计算方法
18.
Design of blanking and punching compound mould about the high speed marine carburetor
高速船用化油器落料冲孔复合模具设计