1.
Vision-Based Measurement of Weld Pool Surface Depression in TIG Welding;
TIG焊接熔池表面变形的视觉检测
2.
Numerical Simulation of the Transient Behaviors of Full-Penetrated TIG Weld Pools;
全熔透TIG焊接熔池形态瞬时行为的数值模拟
3.
Observation of Melting Pool and Electrode during TIG Arc Welding from High Speed Video Image;
高速摄像技术中TIG焊接过程的熔池和电极研究
4.
Numerical simulation of welding arc and surface-activating element on weld shape in TIG welding
焊接电弧与活性组元对TIG焊熔池形貌影响的数值模拟
5.
Study of forming mechanism of molten pool of TIG helium-arc small-gap butt welding for Tantalum sheet
钽薄板小间隙TIG氦弧对接焊熔池形成机理的研究
6.
Numerical simulation of transient three-dimensional shape of TIG weld pools based on FLUENT
基于FLUENT的TIG焊瞬态熔池三维形态的数值模拟
7.
Detection and control of pool width in TIG welding of copper clad aluminum wire
铜包铝线材TIG焊熔池宽度的最佳检测与控制
8.
Study on Activating TIG Welding and Mechanism of Fluxes Increasing Weld Penetration for Aluminum Alloys;
铝合金活性TIG焊接法及其熔深增加机理的研究
9.
The varied weld penetration depths of austenic stainless steel in A-TIG welding are studied.
采用活性化焊剂TIG焊接方法研究了奥氏体不锈钢焊缝熔深的变化.
10.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
11.
Study on the Performance of TIG Welding Joint for 3.5Ni Steel
3.5Ni钢TIG焊焊接性能研究
12.
Microstructure and Mechanical Property of TIG Welded Joints of Titanium Alloy/Stainless Steel;
钛合金/不锈钢TIG熔焊接头微观组织及力学性能分析
13.
Effect of Multi-component Active Fluxes on Penetration in TIG Welding
多组元活性剂对TIG焊焊缝熔深的影响
14.
Characteristic of Molten Pool During Laser Welding of TA15
YAG激光焊接钛合金TA15熔池特征
15.
Study on the Properties of Super304H Steel Welded Joints by TIG Welding Process;
Super304H钢TIG焊接头性能研究
16.
Microstructure and properties of Mg alloy joint by A-TIG and TIG
镁合金活性TIG焊与TIG焊的接头组织与性能分析
17.
The Effect of Activating Flux on the Welding Penetration of 20g Steel TIG
活性剂对20g钢TIG焊熔深的影响
18.
Modeling and Control of Weld Geometry for Welding Rapid Prototyping Based on TIG Building-up Technology;
TIG熔焊成型中焊缝几何尺寸的建模与控制