1.
The faster the screw rotational speed was, the feebler the influence of vibration field to polymer melt was.
螺杆转速越大,振动场对表观粘度的影响就越小。
2.
digital screw rpm readout instrument with up/down scroll buttons for precise speed regulation.
螺杆转速数字输出带有上/下键可获得精确速度调节。
3.
The lowest possible rpm is recommended to minimize fiber breakage and screw recovery should be set accordingly.
建议用尽可能低的螺杆转速以减小纤维的绞断和螺杆松退应据此设定。
4.
The Research of the Connection of Feeding Mete with Overfill Adding and Rotate Speed at Gesso Wallboard Screw Extrusion Machine
石膏墙板螺杆挤压机溢流加料情况下输送量与螺杆转速的关系研究
5.
Slower rpm" s result in a more uniform melt by minimizing shear heat buildup.
较低的螺杆转速会由于最小的剪热而导致更均匀的熔化。
6.
The relation between extrudate density and screw speed,die temperature is also discussed.
还揭示了口模温度和螺杆转速与制品密度的关系。
7.
Based on the melting experiments of PP powder in twin-screw extruder, the melting capacity of different screw-thread sets and the revolution of the screw was studied.
通过对PP粉料在双螺杆挤出机中的熔融实验，研究了不同螺纹组合和螺杆转速对物料的熔融能力。
8.
The variation of the operating condition did not change the distributive range magnitude of the dispersed phase droplet.
螺杆转速和挤出机产量的变化对末端分散相液滴直径的分布范围影响不大。
9.
The Influence of PCP Test Rotary Speed and Viscosity on the Detection of Its Hydraulic Performance
螺杆泵试验转速和黏度对水力特性检测的影响
10.
Research of Electromechanical Controlling Technology for Rotational Speed of ESPCP System;
潜油螺杆泵采油系统转子转速的机电调控技术研究
11.
Non-rotating stem with precision Acme threads and burnished finish. Double Acme for faster operation.
不旋转的阀杆具有精密的梯形螺纹和抛光光洁度。双梯形螺纹使得操作更加快速。
12.
Model and fatigue life analysis for screw rotor of single screw compressor
单螺杆压缩机螺杆转子模态与疲劳分析
13.
number of revolutions to speed
螺旋桨转速与航速比转数与船速比
14.
gyro-meter type tachometer
陀螺测试仪型转速计
15.
Tie Rod End To Steering Knuckle Nut
转向拉杆端与转向关节螺栓
16.
Remove bolts holding shift lever to transmission.
拆卸将排挡杆固定到变速箱的螺栓。
17.
Technological Progress in High Speed Extrusion of Single-screw Extruders
单螺杆挤出机高速挤出技术研究进展
18.
The main machine uses frequency conversions for speed requlation, and super-taper twin-screwextruder with temperature-regulating in the screw core.
主机采用变频调速，螺杆芯部调温得超锥形双螺杆挤出机。