1.
Aerobic treatment control system of APMP pulping wastewater based on expert system
基于专家系统的APMP制浆废水好氧处理控制系统
2.
Study on Treatment of Wastewater of Poplar P-RC APMP with a Composite Two-phase Anaerobic Bioreactor
两相厌氧生物反应器处理杨木P-RC APMP制浆废水
3.
Characteristics of Granular Sludge of the Internal Circulation Anaerobic Reactor during Treating the Wastewater of P-RC APMP
厌氧内循环反应器处理P-RC APMP高浓制浆废水颗粒污泥特性分析
4.
Modification and Application of Waste Liquor from APMP Process
APMP高得率制浆废液的改性及应用
5.
The Separation and Application of the Hemicellulose From the Waste Liquor of APMP
APMP制浆废液中半纤维素的分离和应用
6.
Treatment of UASB-improved oxidation ditch-flocculation process on high yield APMP pulping wastewater
UASB-改良式氧化沟-物化工艺处理高得率APMP浆废水
7.
Effects of Substituting Mg-base for Na-base on Properties of Effluent from Chemical Impregnation and HC-retention Stages in Triploid Poplar Laboratory P-RC APMP Pulping
镁碱替代钠碱对杨木P-RC APMP制浆废液的影响
8.
Refiner Control System for APMP Aspen Papermaking of 100000 Tons per Year
10万t/a APMP杨木制浆高浓磨浆控制系统
9.
The Study on Reconstruction Project of APMP Wastewater Treatment
APMP废水处理改造工程试验研究
10.
Study on Aspen P-RC APMP Wastewater Characteristics and Its Anaerobic Treatment
杨木P-RC APMP废水的厌氧处理
11.
Study on Energy-conserving of Pulping Using a Thin Chip P-RC APMP Process;
薄片P-RC APMP制浆节能技术研究
12.
Comparison of P-RC APMP Pulping Performances of Wood Chips Stored in Different Conditions
木片储存对P-RC APMP制浆性能的影响
13.
Pulp-making process of Eucalyptus urophylla× E. grandis APMP using infrared spectrum.
利用红外光谱研究尾巨桉APMP制浆过程
14.
Study on APMP Properties and Its Process of Two Kind of Eucalyptus;
两种桉木APMP的制浆性能及制浆过程的研究
15.
Treatment of wastepaper pulp effluents by photo-Fenton process
光催化-Fenton工艺处理废纸制浆废水
16.
Treatment of wastepaper pulp wastewater by heterogeneous photo-Fenton process
非均相光-Fenton法处理废纸制浆废水
17.
Advanced treatment of composite wastewater from regenerated papermaking by O_3/UV+BAC technology
O_3/UV+BAC深度处理废纸制浆造纸废水
18.
The design of a high-consistency refiner control system in APMP pulping production line
APMP制浆中高浓盘磨机的一种控制系统的设计