1.
Causes and Preventing Measures of the Slab Caster Center Segregation
连铸板坯中心偏析的成因及预防措施
2.
The Effect of Solidification Structures on Central Segregation of Slabs
凝固组织对连铸板坯中心偏析的影响
3.
Effect of Continuous Casting Slab's Center Segregation on Microstructures and Properties of Steel Sheet
连铸板坯中心偏析对钢板组织和性能的影响
4.
Modelling of Fluid Flow and Centerline Segregation in Continuous Thin Slab Casting With LES Method
薄板坯连铸流场与中心偏析的大涡模拟
5.
Effect of secondary dendritic arm spacing on center carbon segregation of slab
连铸板坯二次枝晶臂间距对中心碳偏析的影响
6.
Countermeasures for Centerline Segregation and Central Porosity of Continuous Casting Billets
预防小方坯中心偏析与中心疏松的措施
7.
Cause Analysis and Countermeasure of Continuous Casting Square Bloom Central Segregation for Bearing Steel
轴承钢连铸方坯中心偏析的成因分析及对策
8.
Thermal diffusion rule of central carbon segregation in billets for steel cord
帘线钢坯中心碳偏析的热扩散规律研究
9.
Cause and Preventive Measure for Central Segregation of Bearing Steel Bloom
大方坯轴承钢中心偏析的成因及预防措施
10.
Optimization of dynamic secondary cooling technology in the control of center segregation of medium carbon steel slab
减轻铸坯中心偏析的动态二冷技术优化
11.
Effects on 77B Cast Slab Center Segregation of F-EMS
凝固末端电磁搅拌对77B铸坯中心偏析的影响
12.
Study on the effect of dynamic soft reduction on the centerline segregation of continuously casting pipeline steel slab
轻压下对管线钢连铸坯中心偏析影响的研究
13.
Application of dynamic soft reduction technology in the control of centerline segregation of medium carbon steel slab
动态轻压下在中碳钢铸坯中心偏析控制中的应用
14.
Pattern Evolvement of the Central Segregation and Looseness of the Continuous Casting Billet in Rolling Process
连铸坯中心偏析和疏松缺陷在轧制过程中的形态演化
15.
STUDY OF THE EFFECTION OF DIFFERENT SEGMENT REDUCTION PARAMETERS ON CENTER SEGREGATION OF THE SLAB
扇形段不同压下参数对铸坯中心偏析影响的研究
16.
Effect of Central Segregation on Mechanical Properties of High Manganese Medium and Heavy Steel Plate
中心偏析对高锰钢中厚板力学性能的影响
17.
Formation Mechanism and Prevention of Center and Triangle-Zone Cracks in Continuous Cast Slabs
板坯中心裂纹和三角区裂纹的成因与防止
18.
Analysis on Causes of Slab Stagnating in CC and Their Improvement Measures
板坯连铸“滞坯”原因分析及改进措施