1.
The Study of the Ceramic Paste Rheological Properties in the Paste Extrusion Process
挤出成形过程中陶瓷泥料的流变特性研究
2.
Study on Forming Mechanism and Experimental of Staple Fiber-Rubber Composite Material Radial Extrusion
胎面胶短纤维增强复合材料径向取向挤出成形机理及实验研究
3.
To shape(a plastic, for instance) by forcing it through a die.
挤压出用一模子把（如塑料等）挤压成形
4.
Technological Analysis and Cold Extrusion of Two-exit Components with Ring Shape
两出口环形件的冷挤压成形工艺研究
5.
Plastic material is extruded through very small holes to form fibres.
塑料从细孔挤压出来形成纤维。
6.
The entire cell is extruded and constitutes the secretory product.
整个细胞被挤出形成分泌产物。
7.
forces a liquid out as a fine spray when a button is pressed.
当按钮被下压的时候液体被挤出来形成细雾。
8.
Study on frictional effect between extrusion container and billet in forward extrusion forming
挤压筒摩擦对正挤压成形影响的研究
9.
a concavity in a surface produced by pressing.
由于挤压而形成的凹陷。
10.
Influence of backward extrusion punch shape to the extrusion process
反挤压凸模形状对挤压成形工艺的影响
11.
Numerical Simulation Analysis of Piercing and Upsetting Extrusion Process for Spur Gear
直齿轮冲挤——镦挤成形过程数值模拟分析
12.
Contrast analysis of extending forming between continuous extrusion and forward extrusion
连续挤压与正挤压在扩展成形中的对比分析
13.
The cable made up of strands is squeezed into a circular shape.
将钢丝束组成的缆挤压成圆形。
14.
Multilayer co-extrusion feedblock, allowing for coextrusion of up to 7 kinds of raw materials.
多层共挤复合分配器,最多达七种成份原料共挤复合挤出。
15.
Processing Method of Screw for Conical Twin-screw Extruder
锥形双螺杆削挤出机螺杆的加工方法
16.
bradenhead squeeze pressure
关闭井口套管闸门形成的挤压压力
17.
By use extrude granulator to make soft material into strip granules.
软材通过挤压制粒机制成条形状颗粒。
18.
Research on Micro-extrusion Forming of H62 and Its Size Effects;
H62黄铜微挤压成形及其尺寸效应研究