1.
Study on Machining Performance of the Improved Ferrite Ductile Iron Crankshaft
改善铁素体球铁曲轴切削加工性能的研究
2.
Research on Application of Shell Casting Technology of Nodular Castiron Crankshaft of S1100 Diesel Engine;
S1100柴油机球铁曲轴壳型铸造工艺的应用研究
3.
Finite Element Analysis and Design Optimization of Ductile Iron Crankshaft Undercut Slot;
球铁曲轴沉割槽有限元分析及优化设计
4.
Fatigue Strength and Fillet Rolling Study of Ductile Iron Crankshaft for YC6108ZQ Diesel Engine
YC6108ZQ柴油机球铁曲轴疲劳强度及圆角滚压研究
5.
Study on Fatigue Strength of Nodular Graphite Cast Iron Crankshaft of Locomotive High Speed Diesel Engine
内燃机车用高速柴油机球铁曲轴疲劳强度的试验研究
6.
This paper gives analysis and preventive measures to mechanism of cracks, which appear after main bearing melt of crank shaft on nodular cast iron of6300 C diesel engine.
对6300C型柴油机球铁曲轴在主轴承烧瓦后产生裂纹的机理进行分析，并提出解决措施。
7.
A Tentative Study of Manufacturing ADI 480 Diesel Engine Crankshaft
奥贝球铁480柴油机曲轴的初步研究
8.
Production of Multi-cylinder Ductile Iron Crankshaft
球墨铸铁QT850-4多缸曲轴的研制
9.
A Study on As-Cast NoduIar Cast Iron Containing Sb、Al and Ti in Crankshaft Production
含锑、铝、钛铸态球墨铸铁曲轴材料的研究
10.
Cause and Precaution of Shrinkage Defects of Nodular Cast Iron Crankshafts Produced in Sand-coated Metal Mold
铁模覆砂球墨铸铁曲轴收缩缺陷的产生原因与预防措施
11.
TESTING NODULARIZING QUALITY OF THE NODULAR CAST IRON CRANKSHAFT FOR LIGHT ENGINE BY COMPUTER-AIDED ACOUSTIC VIBRATION FREQUENCY TECHNIQUE
轻型发动机球墨铸铁曲轴球化质量的计算机声谐振频率检测
12.
The Nitrogen Turns+The Circle Cape Rolls To Press The Compound Enhances The Axial Application Study In Spheroidal Graphite Cast Iiron Crankshaft
氮化+圆角滚压复合强化球墨铸铁曲轴的应用研究
13.
Pilot bearing in crankshaft. The pilot bearing in the crankshaft is usually either a Bushing or a Ball bearing.
曲轴上的导向轴承:曲轴上的导向轴承一般或者是轴瓦,或者是球轴承。
14.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
15.
Analysis on Bending and Creep Buckling of Symmetrically Viscoelastic Shallow Spherical Shell;
粘弹性材料扁球壳轴对称弯曲和蠕变屈曲分析
16.
Pullout Test Research on the Underground Water Pipelines
埋地球墨铸铁供水管道轴向拉拔试验
17.
Process of Metal Mold Casting for S195 Nodular Cast Iron Camshaft Production
S195球铁凸轮轴金属型铸造工艺
18.
Casting Technology of High Strength and Thick Section Ductile Iron Mainshaft
高强度厚大断面球墨铸铁主轴的铸造