1.
Decomposition analysis of CO_2 emission intensity caused by electric power consumption in China
中国电力消费CO_2排放强度分解分析
2.
Scenario Analyses of China's Energy and Power Use and Carbon Emission in 2020
2020年我国能源电力消费及碳排放强度情景分析
3.
A new method to deuce the safe limits for pollution emission by calculating the concentration of per unit intensity of pollutant
利用单位源强浓度贡献确定排放限值
4.
Effects of EGR Cooling Intensity on Turbocharged Diesel Engine NO_x Emissions
EGR冷却强度对增压柴油机NO_x排放的影响
5.
Analysis of Large Diameter Gas Drainage Well Casing Collapsing Strength Computation
大口径瓦斯排放井套管抗挤强度计算分析
6.
The amount or rate of emission or ejection.
排放量流量、流速，或排出量，排出的速度
7.
The intensity of a radioactive source.
放射性放射原的强度
8.
minimal detectable activit
最低检出放射性强度
9.
Abstract: The concentration field distributions of the elevated point sources is calculated using a numerical calculation method.
文摘:使用数值计算的方法来计算给定源强下的高架排放点源的浓度场分布情况。
10.
Take stronger measures in law enforcement by relying on the departments of both environmental protection and traffic control so that more than 90% of the automobiles' exhaust will come up to the limits.
加强环保与交通管理部门联合执法力度，使上路行驶的机动车尾气排放合格率保持在90%以上。
11.
Valves with threaded-in strength welded seats offer an additional level of safety against fugitive emissions.
带有螺纹旋进强度的焊接阀座能够为短时排放提供更高水平的安全性能。
12.
It is prohibited to discharge waste water containing high-level radioactive matter into the sea.
含强放射性物质的废水，禁止向海域排放。
13.
The applicability to the occurrence volume of condensation water is strong, can be discharged not only intermittently, but also continuously.
对凝结水的发生量适用性强，既可间歇排放，又可连续排放。
14.
The system is based on a system of allowance that can be banked or sold by emitters.
这种制度是以许可排放量制度为基
15.
The effect of the resulting NO2 on atmosphere varies according to the height and latitude at which the emission occurs.
氧化氮对大气层的影响因排放高度和排放纬度的不同而不同。
16.
A New Energy Saving and Emission Reducing Dispatching Mode Considering Energy Consumption and Emissions for Generation Market
兼顾能耗与排放的发电侧节能减排调度新模式
17.
CFC release rate
氯氟碳化合物的排放速度
18.
Drain lubricant to the correct level.
将润滑剂排放到正确的高度。