1.
Preparation of metallic samples with slip band during cold plastic deformation and experimental performance
金属冷塑性变形滑移带样品制备及实验运行
2.
The relief of some of the internal strain energy of a previously cold-worked metal, usually by heat treatment.
冷塑性变形金属释放其部分应变能的过程叫回复，通常采用热处理的方法。
3.
Study on Microstructure and Mechanical Properties of Heavily Cold Drawn Pearlite Steel Wires;
剧烈冷拉塑性变形珠光体钢丝组织及性能研究
4.
Structural Optimization Design of Cold Extrusion Die Based on Small Elastic-plastic Deformation
基于小弹塑性变形的冷挤压凹模结构优化设计
5.
Alternating magnetic treatment of Aluminum alloy after cool figuration and coupled field analysis
冷塑性成形后铝合金交变磁处理及耦合场分析
6.
DEFORMATION BEHAVIOR OF SPRAY-DEPOSITED La-BASED BULK AMORPHOUS ALLOY IN SUPERCOOLED LIQUID REGION
喷射成形大尺寸镧基块体非晶过冷液相区内的塑性变形行为
7.
distortion energy plasticity condition
形状变形能塑性条件
8.
Influence of Cold Rolling Process on Plastic Strain Ratio of 1100 Aluminum Alloy Plates and Earring Ratio of Cup-shaped Parts
冷轧生产工艺对1100铝合金板塑性应变比与杯形件制耳率的影响
9.
element of mechanics of plasticity
塑性变形的力学原理
10.
extrusion stress
(塑性变形的)挤压应力
11.
Elevating the temperature of the cooling water or reducing the wall temperature before water quenching can prevent walls from yielding effectively.
提高冷却水温度或降低进水冷焦前塔体温度能有效防止塔体产生塑性变形。
12.
It is assumed that plastic deformation stems from the localization of shear strain.
岩样的塑性变形假设根源于塑性应变局部化。
13.
Plastic deformation heat and friction heat are the two principle factors which caused the temperature rise of cold rolled thin plate.
冷轧时轧件塑性变形热和摩擦热是导致轧件温度升高的两个主要原因。
14.
The plastic deformation on ribs caused by punch push down and skin springback.
筋条的塑性变形既有凸模下压导致的塑性变形,又有蒙皮回弹导致的塑性变形;
15.
Thermoplastic Deformation Behavior and Microstructure Evolvement of TA15 Titanium Alloy;
TA15钛合金热塑性变形行为与组织演变
16.
Palstic Deformation Mechanism and Microstructure Evolution of Nanocrystalline Nickel;
纳米金属镍的塑性变形及微结构演变
17.
Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation
GH4145高温合金热塑性变形流变应力研究
18.
Microstructure and Properties of 800 MPa Cold Rolled TRIP Steel
800MPa级冷轧相变诱发塑性钢的组织与性能