1.
Prediction of forming limit diagram of aluminum sheet at elevated temperatures
![点击朗读](/dictall/images/read.gif)
温成形中铝合金板成形极限图的预测研究
2.
Reaserch on Stamping of High Strength Steel Sheet Car B-Pillar Stiffer
![点击朗读](/dictall/images/read.gif)
高强度钢板成形轿车B柱加强板的研究
3.
Influence of Boundary Condition on High Frequency Inducting Plate Bending
![点击朗读](/dictall/images/read.gif)
船舶板材边界条件对高频感应弯板成形的影响
4.
The ceiling was groined.
![点击朗读](/dictall/images/read.gif)
天花板被建设成拱形。
5.
The carpenter squared the board.
![点击朗读](/dictall/images/read.gif)
木匠把木板弄成正方形。
6.
a vertical board or panel forming the head of a bedstead.
![点击朗读](/dictall/images/read.gif)
形成床架头部的一个直立的板或嵌板。
7.
One of the sheets of wood glued together to form plywood.
![点击朗读](/dictall/images/read.gif)
层板被粘在一起形成胶合板的几张木板的一张
8.
The drum sieve is made of corrugated iron with strip-shaped holes, which is folded to rotundity.
筛网由有条形孔的波形钢板制成并折成筒形。
9.
The Research on the Drawing of FVS0812 Hemisphere-shaped Workpiece;
![点击朗读](/dictall/images/read.gif)
FVS0812薄板半球形零件拉深成形研究
10.
Use batter to form shape of net on the grill.
![点击朗读](/dictall/images/read.gif)
面浆做成网状,在铁板上烧成形,待用.
11.
Method to Generate Contour Figure for Incremental Sheet Metal Forming Technology
![点击朗读](/dictall/images/read.gif)
板料渐进成形工艺等高线图生成方法
12.
Research on Board-Fins Rolling Method and Forming Process Simulation;
![点击朗读](/dictall/images/read.gif)
板式翅片滚压成形方法及成形过程仿真研究
13.
Numerical Simulation and Shaping Analysis on the Process of Multi-Point Forming for Thin Sheet Metal;
薄板多点成形过程的数值模拟及成形性分析
14.
Research on the Mechanism and Deformation Behaviour of Laser Bending of Shipbuilding Steel Plate;
船用钢板激光弯曲成形机理及成形规律的研究
15.
Technological Parameter and Forming Rule Study of Metal Sheet's Laser Forming
![点击朗读](/dictall/images/read.gif)
金属板材激光成形工艺参数及成形规律研究
16.
An Approximate Calculation of Cable Forces of Board stayed Bridges After Pulling board Being Formed
板拉桥拉板形成后斜拉索索力的近似计算
17.
Study on TWB Stamping Forming and TWB Optimizing Design;
![点击朗读](/dictall/images/read.gif)
拼焊板冲压成形规律及板坯优化设计研究
18.
Simulation Study on Forming Process of Inner Panel of Automobile Front Fender
![点击朗读](/dictall/images/read.gif)
轿车翼子板内板的成形工艺数值模拟研究