1.
Experimental Investigation on Drying Characteristics of Gas-Solid Stirred Fluidized Bed;
气固搅拌流化床的干燥特性实验研究
2.
For satisfactory fluidization under these conditions an agitator is used in the bed.
在这些情况下，为了得到满意的流态化，在流化床中加有搅拌器。
3.
Numerical Simulation on Flow Field of Rotory Jet Mixing System and Nozzle Structure Optimization;
旋转射流搅拌全流场数值模拟及喷嘴结构优化
4.
MABIE (Multistage Agitated-bed Ion-exchange)
多级搅拌床离子交换
5.
The Effect of Stirring Intension on the Performance of a Denitrifying Moving Bed Biofilm Reactor (MBBR);
搅拌强度对反硝化紊动床的特性影响研究
6.
Simulation and Optimization in Stirred Tank for High Viscosity Fluids
用于高粘度流体的搅拌釜的模拟及优化
7.
Study on the Flow Patterns and Optimum Structure of Batch High-shear Mixers
剪切型搅拌罐流场分析与结构优化研究
8.
Agitation Mechanism and Its Application Research of a New Type Punched Agitator
新型穿流式搅拌器的搅拌机理分析及实验研究
9.
Design Theory of Submersible Mixer Impeller and Numerical Simulation of Agitated Flow Field;
潜水搅拌器叶轮设计理论及搅拌流场数值模拟
10.
Experimental Research on the Potential Flow in the Mixing Device of the Concrete Mixer Vehicle;
混凝土搅拌运输车搅拌筒内部流动的实验研究
11.
In the bed there is stirrer. It avoid agglomeration of damp material and forming channel flow during drying.
床内设置搅拌，避免了潮湿物料的团聚及干燥过程中形成沟流。
12.
Study on Jet Stirring Fluid Dynamics of Photocatalytic Reactor and Its Structure Optimization;
光催化反应器射流搅拌流体力学行为研究及结构优化
13.
The Optimized Disign and Failure Study on Pin Tool of Friction Stir Welding of Copper Alloy
铜合金搅拌摩擦焊搅拌头优化及失效研究
14.
Study on the Numerical Simulation and Visualization Experiment of the Three-Dimensional Chaos Mixing Flow Field in Laminar Stirred Tank;
层流搅拌槽内三维混沌混合流场数值模拟及可视化实验研究
15.
Study on CFD and FEM Based Integration Technique of Propeller Design& Manufacture;
基于流场和结构优化的搅拌桨设计/制造集成技术研究
16.
Study on the Rheological Behavior of Salt-tolerant Polymer and Optimize Stirrer;
抗盐聚合物水溶液流变行为的研究及搅拌器的优化
17.
Friction Stir Welding of SiCp Reinforced Aluminum Matrix Composite and Fluid Simulation;
碳化硅颗粒增强铝基复合材料搅拌摩擦焊与流场模拟
18.
Structure Optimization and Hydraulic Characteristics Study on Driving Turbine in Jet Mixing System for Industry Oil-Sludge;
工业油泥射流搅拌系统中动力涡轮水力性能研究及结构优化设计