1.
Throttle Cable at Throttle Body—V-8 Engines
节流阀体的节流阀电缆—V-8引擎
2.
Install throttle body to intake manifolRefer to Throttle Body installation in this section of the group.
在进气歧管上安装节流阀体。请参阅单元中本节的节流阀安装部分。
3.
CAD/ CAM for throttle body die-casting mold based on solid edge
基于Solid Edge的节流阀体压铸模CAD/CAM
4.
Remove the air inlet hose from the throttle body and air cleaner.
从节流阀体和空气滤清器上拆下气流入口软管。
5.
Connect the air inlet hose to the throttle body and the air cleaner.
将空气入口软管接至节流阀体和空气滤清器。
6.
Computer Aided Design and Manufacturing of the Die-casting Mold;
节流阀体压铸模计算机辅助设计与制造
7.
Smooth operation of throttle linkage and throttle body air valve.
节流连杆和节流体空气阀的平稳操作。
8.
Install the regulator with the arrow on the body pointing in the direction of the flow.
安装调节阀，使其阀体上的箭头指向流体流向。
9.
This is a gate valve (check valve, butterfly valve, cut-off valve, magnetic valve, remote valve, relief valve, throttle valve, cock).
这是一个闸阀（止回阀、蝶阀、切断阀、电磁阀、遥控阀、安全阀、节流阀、旋塞）。
10.
Install regulator in the line with the arrow on the body pointing in the direction of flow.
在管线内安装调节阀，使得阀体上的箭头指向流体流向。
11.
The bottom of the disc is guided by the body seat ring for maximum disc stability in throttling applications.
阀瓣底部由阀体阀座环引导，最大限度提高阀瓣在节流应用中的稳定性。
12.
A valve that regulates the flow of a fluid, such as the valve in an internal - combustion engine that controls the amount of vaporized fuel entering the cylinders.
节流阀调整流体流动的阀门，如内燃机中控制蒸汽燃料进入汽缸的量的阀门
13.
A faucet or valve by which the flow of a liquid or gas can be regulated.
活塞一个能调节液体或气体流动的龙头或阀门，
14.
Straight moving type relief valves, mainly valve disc, valve body,, spring-loaded, roof, regulation pole, conditioning nut, and other integral parts.
直动型溢流阀，主要有阀芯、阀体、弹簧、上盖、调节杆、调节螺母等零件组成。
15.
a pedal that controls the throttle valve.
控制节流阀流量的杠杆。
16.
A STUDY ON VORTEX VALVE FOR THRUST RANDOM MODULATION OF SRM
固体发动机推力随机调节的涡流阀方案研究
17.
Cause and treatment of fluid-induced vibration for pilot-cage type control valve
先导式套筒调节阀的流体激振原因及处理
18.
cam throttle control
节流阀凸轮控制机构