1.
Construction Method of Post-pouring Flange Plate of Simple Box Girder in Passenger Dedicated Line
客运专线简支箱梁后浇翼缘板施工工法
2.
Cracks have been found in the flange and web splices at groove welds in at least four bridges.
至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
3.
The behavior and performance of the cracked flange plates suggest that good levels of fracture toughness exist in the A 517 steel.
开裂的翼缘板的性能及使用状态说明A517钢的断裂韧性良好。
4.
Experiment on Welded Flange Plate (WFP) Reinforced Conneciion
钢结构焊接翼缘板加强式梁柱刚性连接的试验研究
5.
The Manufacturing and Usage of Box Beam Flange Slab Casting Form for Special Passenger Line
高速客运专线过隧道箱梁翼缘板补浇筑模架的研制与使用
6.
According to the relationship between the structural strength and slenderness of plate elements, the limited width-to-thickness ratio of the flange of a box-section column under seismic load is derived.
由构件承载力与壁板宽厚比的关系,得出了抗震设计箱形截面柱翼缘板宽厚比限值。
7.
These include gusset plates welded to the flange.
这些包括焊接到翼缘上的节点板。
8.
The web and flanges of the main girders were fabricated from ASTM A441 steel.
主梁的腹板和翼缘用ASTM A441钢制造。
9.
Small rectangular backup bars were used to fabricate the web-bottom flange connection.
在腹板与下翼缘的施焊中使用小矩形挡板。
10.
Effective Width and Plate-to-Plate Restriction Calculations of Profiled Steel Sheeting
压型钢板翼缘有效宽度及板组约束的研究
11.
Both flange and web exhibited satisfactory elongation characteristics (i.e. 28%).
翼缘和腹板都有令人满意的延伸率（即28％）。
12.
Three structures have exhibited cracking at the ends of flange gusset plates.
已有三个结构在翼缘节点板端部出现了裂纹。
13.
Influences and treatment of the diaphragm structure on flange stress when box beam widening
箱梁拼宽时隔板构造对翼缘应力的影响及处理
14.
Elastic buckling of web restrained by flanges in I-section members
考虑翼缘约束的工字形截面腹板的弹性屈曲
15.
Evaluation of In-plane Stiffness of Corrugated Steel Web with Flange
具有钢翼缘的波形钢腹板的面内刚度计算
16.
The crack surfaces in the web and flange were subjected to visual examination in order to evaluate crack growth regions.
为了估计各裂纹扩展区，对翼缘和腹板的裂纹表面进行了宏观检验。
17.
Elastic Buckling of Web Plates in I-girders under Combined Stresses Considering of the Restriction from the Flange to the Web;
考虑翼缘约束作用的工字梁腹板在复合应力作用下的弹性屈曲
18.
Studies on Plane Stiffness and Bearing Capacity of Composite Structure for Slab on the Lower Flange;
楼板位于钢梁下翼缘的组合结构平面刚度及承载力研究