1.
Microstructure of the Interfacial Region between CBN Grains and AgCuTi Alloy Reinforced by TiN Particles
TiN颗粒增强AgCuTi合金钎焊CBN磨粒的界面微结构
2.
Profile Grinding of Titanium Alloy with Monolayer Brazed CBN Wheels;
单层钎焊CBN砂轮成型磨削钛合金的研究
3.
The Mechanism Research on Laser Brazing of Diamond Grits;
激光钎焊金刚石磨粒工艺及机理研究
4.
Study on the relationship between microtopography of brazed diamond and the abrasion of grinding grains
钎焊金刚石微观形貌与磨粒磨损状态关系研究
5.
Delaminating Behavior and Formation Mechanism of the Interfacial Microstructure in the Laser Brazing Diamond with Ni-Cr Alloys
Ni基钎料激光钎焊金刚石磨粒界面显微结构及形成机理
6.
Experimental Investigation on the Drilling of Brittle Materials with Brazed Diamond Grains;
钎焊金刚石磨粒钻削脆性材料的实验研究
7.
Numerical Simulation and Experimental Study on Laser Brazingfilm CBN Gear-Honing-Tool
激光钎焊镀膜CBN外珩轮数值模拟与实验研究
8.
Theoretical Analysis and Process Study on Brazing Metallic-membrane-plating CBN on External Honer by the Method of Laser-Scan-heating;
激光扫描钎焊镀膜CBN外珩轮的理论分析与工艺研究
9.
Study on Cu-based Filler Metal Brazed Composite Coating with Particle Reinforced;
铜基钎料钎焊颗粒增强复合涂层的研究
10.
Experimental Study on Surface Grinding with Brazed Diamond Tools;
钎焊金刚石工具平面磨削的实验研究
11.
Technical and Mechanism Study on Brazing of Wear-Resistant Ceramic Lining
耐磨陶瓷衬板的钎焊工艺及机理研究
12.
Wear Characteristics of Induction Brazing Diamond during the Grinding of Stone
石材磨削中感应钎焊金刚石磨损特征研究
13.
Brazability of SiC Particulate Reinforced Aluminium Metal Matrix Composites
SiC颗粒增强铝基复合材料的钎焊性
14.
Experimental Investigation on Grinding Engineering Ceramics with Brazed Diamond Abrasive Wheel;
金刚石钎焊砂轮磨削工程陶瓷的试验研究
15.
Creep rupture and enhancement mechanism of Ag particle-enhancement composite solder joints
Ag颗粒增强复合钎料钎焊接头蠕变断裂及强化机理研究
16.
Experiment Investigation of the Diamond Grits Damage Mechanism by Laser Brazing;
激光钎焊金刚石颗粒损伤机理的实验研究
17.
Brazing of Diamond Abrasive Processing Stone Wear and Technological Parameters Optimization
钎焊金刚石磨具加工石材的磨损和工艺参数优化
18.
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊