1.
Research and Application of High Activity Slag Powder from Ni-Cr-Fe Alloy;
高活性镍铬铁合金渣粉的研究与应用
2.
A Study on Properties of Low Thermal Expansion High Nickel Cast Iron Containing 2％Cr
含2％铬的高镍低膨胀铸铁性能的研究
3.
ACCELERATED STRIPPING OF Ni-Fe/Cr OR Cu/Ni/Cr ELECTROPLATES
快速退除镍铁合金/铬、铜/镍/铬镀层新工艺的研究和应用
4.
Specification for welding of Cr-Ni austenitic steel, Fe-and Ni alloy pipe for petrochemical industry
石油化工铬镍奥氏体钢、铁镍合金和镍合金管道焊接规程
5.
" Nickel-chromium/gold-iron, copper/gold-iron low temperature thermocouple wires and their reference tables"
GB/T2904-1982镍铬-金铁、铜-金铁低温热电偶丝及分度表
6.
(trademark) an nickel-base alloy with chromium and iron; used in gas-turbine blades.
（商标）一种镍基合金，含铬和铁，用于燃气轮机叶片。
7.
Study on eliminating Cu(Ⅱ),Ni(Ⅱ),Zn(Ⅱ) and Cr(Ⅲ) by ferrocene hydroxamic acid
二茂铁羟肟酸去除铜(Ⅱ)、镍(Ⅱ)、锌(Ⅱ)、铬(Ⅲ)的研究
8.
The abrasive resistance of as-cast martensitic high chromium cast iron is 3 times more than that of Ni-hard cast iron.
铸态马氏体高铬铸铁的耐磨性是镍硬铸铁的3倍以上。
9.
Nickel-Chromium/NickelAluminium/Silicom thermocouple
镍铬-镍铝/硅热电偶
10.
cast iron containing alloying elements (usually nickel or chromium or copper or molybdenum) to increase the strength or facilitate heat treatment.
加入合金元素（通常为镍、铬、铜或钼）以增加强度或便于热处理的铸铁。
11.
Fe-Cr-Ni alloys--Stress corrosion test in high temperature water
GB/T10126-1988铁-铬-镍合金在高温水中应力腐蚀试验方法
12.
This introduction of water treatment has significantly reduced emissions of substances such as phosphorus, iron, chromium, nickel and zinc.
这种水处理技术的引入明显减少了磷、铁、铬、镍和锌等物质的排放。
13.
" Methods for chemical analysis of tantalum and niobium--Determination of iron, nickel, chromium, titanium, zirconium, aluminum and manganese contents in niobium"
GB/T15076.10-1994钽铌化学分析方法铌中铁、镍、铬、钛、锆、铝和锰量的测定
14.
Studies on Technology and Basic Mechanism of Pulse Plating Nanocrystalline Cr-Ni-Fe Alloy;
脉冲电沉积纳米晶铬-镍-铁合金工艺及其基础理论研究
15.
A study of the slag-resistance of magnesia-chromite refractory used for lining ferronickel-alloy smelting furnace
镍铁合金炉炉衬用含铬耐火材料抗渣侵蚀性能的研究
16.
Determination of Si,Mn,P,Cr,Cu and Co in Ferronickel by Inductively Coupled Plasma Atomic Emission Spectrometry
电感耦合等离子体原子发射光谱法测定镍铁中硅、锰、磷、铬、铜和钴
17.
Abrasion-resistant capability of Ni-cast iron and Cr-cast iron were studied by abrasion wears and impact test.
对镍硬铸铁和常用的铬系白口铸铁进行了削盘磨损试验和冲击磨料磨损试验。
18.
On the base of invalidation analysis of the wear liners of the beater, the abrasion-resistant capability experiment is carried through NJ-cast iron and Ct-white iron.
在对搅拌器中衬板失效分析的基础上,对镍硬铸铁和铬系白口铸铁进行了磨料磨损试验。