1.
Effect of Multi-component Active Fluxes on Penetration in TIG Welding
多组元活性剂对TIG焊焊缝熔深的影响
2.
The varied weld penetration depths of austenic stainless steel in A-TIG welding are studied.
采用活性化焊剂TIG焊接方法研究了奥氏体不锈钢焊缝熔深的变化.
3.
Research on Penetration Adaptive Control Technology for Lap Weld of Missile Shell
导弹壳体搭接焊缝的熔深适应控制技术研究
4.
GMAW short-arc tack welds shall not be incorporated into the root pass.
熔化极气体保护焊-短弧点焊焊缝不能与根部焊道合成一体。
5.
Application of Electro Slag Welding with Consumable Nozzle in the Vertical Welding of Blast Furnace Shell in Laigang
熔嘴电渣焊在莱钢高炉炉壳立缝焊接中的应用
6.
Design of Weld Tracking Self-Adaptive Fuzzy Controller in Consumable Electrode Arc Welding
熔化极电弧焊焊缝跟踪自适应模糊控制器设计
7.
Study of Droplet Transfer and Formation s Experiment of Welding Joint in Plasma-MIG Welding;
Plasma-MIG焊接熔滴过渡及焊缝成形的实验研究
8.
Modeling and Control of Weld Geometry for Welding Rapid Prototyping Based on TIG Building-up Technology;
TIG熔焊成型中焊缝几何尺寸的建模与控制
9.
Weld Seam Movement of Magnesium Alloy Tailor-welded Blanks during Deeply Drawing
镁合金拼焊板拉深成形焊缝移动规律
10.
Study on the Mechanism of Penetration Mode for Thin Sheet Laser Deep Penetration Welding;
薄板激光深熔焊接熔透模式的机理研究
11.
Determination of Critical Power Density of Laser Deep-Penetration Welding
激光深熔焊接下临界功率密度的确定
12.
The Effect of Activating Flux on the Welding Penetration of 20g Steel TIG
活性剂对20g钢TIG焊熔深的影响
13.
2 All welds for nozzles and manways shall be full penetration through the vessel wall.
接管和人孔的焊缝应为穿过容器壁的全熔透。
14.
Forming limit and weld seam movement of TWBs with different thicknesses in square cup
差厚拼焊板拉深方盒形件成形极限及焊缝移动
15.
And the weld width decrease with welding speed being increased.
而焊接速度的增大,焊缝正面和背面的熔宽明显减小。
16.
Standard for inspection and measurement with ray photographing for metal melting weld seam of building installation engineering
建筑安装工程金属熔化焊焊缝射线照相检测标准
17.
Welding Procedure and Welded Seam Tracking and Pool Width Control for Copper-clad Aluminum Cable Billet in TIG High-Speed Welding;
铜包铝线坯高速TIG焊工艺与焊缝跟踪及熔宽控制
18.
The Study on Ultrasonic Testing of the Laser-Welding Seam Depth of the Gear Ring;
齿轮环激光焊缝深度超声检测的研究