1.
The effect of card back fixed flat setting on the removal of immature fibers
梳棉机后固定盖板隔距对未成熟纤维去除的影响
2.
Very close setting of front plate or non-parallel setting.
前固定盖板针布隔距太紧或与锡林针布不平行。
3.
Wider gauge between flat and cylinder (more than 0.25 mm).
盖板与锡林间的隔距宽（大于0.25毫米）。
4.
Clinical effect of the splint fix after submucous resection of the nasal septum
鼻中隔粘膜下切除术后应用夹板固定效果的临床观察
5.
The Influence of the Numbers of Movable and Stationary Flat on Nep and Impurity
活动盖板和固定盖板根数对棉结杂质的影响
6.
Study on the Back Stationary Flat and Webclean in Carding Machine;
梳棉机加装后固定盖板及棉网清洁器问题的研究
7.
Effect of back stationary flat number of carding machine on removal of immature fiber
梳棉机后固定盖板根数对未成熟纤维去除的影响
8.
crowfoot holddown
将盖子固定在搭板上的叉子
9.
Cylinder has cover board and web cleaner fixed in front and at back. Takerin dehairing board adopts aluminium section structure. Accessories are light and handy and dust-absorbing effect is good.
锡林前后固定盖板及棉网清洁器，刺辊分梳板等采用铝型材结构，零件轻巧，吸尘杂效果好。
10.
deck securing fitting
甲板绑扎固定用具; 甲板或舱盖上固定集装箱的装置
11.
Remove the four screws that secure the ACM mounting bracket to the floor pan transmission tunnel.
拆去固定ACM固定支架到底板变速器-传动轴盖板的四个螺丝。
12.
Treatment for comminuted fracture of calcaneus that spreading to articular surface by internal fixation with titanium plate
钛板内固定治疗波及跟距关节的跟骨粉碎骨折
13.
Position the underhood lamp on the hood inner panel.
将引擎盖未闭合灯固定于引擎罩内板上。
14.
Install push-in fasteners holding trunk lid slam bumpers to top of fascia.
安装将行李厢盖沿保险杆紧固到面板顶部上的推进式固定件。
15.
Remove push-in fastener attaching trim cover to door inner panel (use special tool C-4829).
拆下把装饰盖板固定在车门内板的压入式钩扣（用特殊工具C-4829）。
16.
Space from Start,Specify Spacing
从起始间隔，指定间距
17.
Space from End,Specify Spacing
末端间隔，指定间距
18.
Strong rectangular frame fixed by screws, an inset hole every25 cm to fix the slotting auger, guard board, bunches of cables and circuit diagram sidekicks, etc.
坚固的用螺丝固定的长方框，每隔25毫米有一个嵌孔，用来固定槽沟、板、缆束及线路图插袋等。